maritpra
Level 1
Level 1
Member since ‎02-04-2004
‎03-04-2020

User Statistics

  • 15 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies
Certifications

User Activity

Hello experts,I have an strange issue with LDP label mapping message. In my lab I have 3 routers. Asr903 and ALU are PE, while asr9922 is P router. I have create xconnect session between asr903 and ALU PE. What I found is asr903 send LDP label mappin...
Hi,I have the topology where ASR9K bundle interface is connected with ASR900 port-channel interface and use BFD signal but the port never come up, below is the detail. ASR9K            => IOS-XR 4.3.2, linecard: A9K-MOD80-TR, A9K-MPA-4x10GEASR903    ...
Hi Expert,Anyone know the command to configure ASR903 fan tray alarm port to be NO/NC?Thanks,Marit
Hi Expert,I have ASR9010 with single incoming interface(GE) and two outgoing interfaces(TenG1 and Bundle-E(TenG2)). the routing/cef/label is configured to forwarding traffic out TenG1. All interfaces are configured with MTU 9194.- When I inject traff...
Hi, ExpertsEquipment: Cisco ASR9922, IOS-XR 4.3.2 Issue: I have problem that my RR do the next-hop-self by using route-policy for client routers, the next-hop is changed as intended but the MPLS label doesn’t changed to reflect the new next-hop.Wha...
Community Statistics
Member Since ‎02-04-2004 08:08 PM
Date Last Visited ‎03-04-2020 12:17 AM
Posts 15