I'm setting up etherchannel on aggregation/access layers. Design is as followsaggregation 6509/6509 running iosaccess layer 2960tclThe access switch currently has a single gbe uplink to each 6509. In my lab, normal stp blocking occurs at the access s...

I'm looking to learn a bit more about rate limiting a VLAN interface on a Cisco 6509 running native IOS/sup2.Sadly, I'm coming up with no documentation on the subject and I'm wondering if anyone has had any experience doing this.

I'm looking to upgrade our access switches in our DC. Currently we are using 2948G's gig uplinked to our 6509s for customer access. Since these switches are going or are EOL, I'm looking at what switches I should be stepping up to. Any input on what ...

I currently have a test environment set up, so that I can test udld and loopguard to prevent spanning tree loops.Topology is as follows:- Two (6500 running IOS) distribution switches with several VLANs doing hsrp.- A single access switch (2948g CatOS...

Hi there,I'm attempting to strip tac from a remote 2848G switch. I removed some config from another switch and effectively locked myself out. I'm assuming there's an order of removing the config that has to be followed. Here's what I have:set tacacs ...