About jdargence

jdargence · 07-25-2017

There's a known bug that makes upgrading via HTTP impossible, but using TFTP on the apciscoshell returns a "no space left on device" error. This is the shell output: archive download-sw /reload tftp://10.252.190.77/ap1g4############################...

jdargence · 08-25-2010

Hello,We have a 7.1 CME on a 3851 that has been running well for the past month. We are currently receiving number caller ID from the Telco and it is getting displayed on the phones. We would like to get caller name to come up on the phones along w...

jdargence · 03-04-2021

Finally figured out my issue. We replaced an outdated ACS with ISE, but weren't able to use the ACS IP in the new server, so we added a NAT to redirect all traffic on our firewall to ISE's new IP. Unfortunately this NAT was also interfering with NATt...

jdargence · 03-02-2021

I did. I generated a new Token and tried to re-register, but the errors don't go away. The last authorization on my licenses is December 03 2020

jdargence · 03-02-2021

Did you ever figure this out? I am seeing similar problems with my deployment

jdargence · 08-24-2017

The last part is basically what I had to do. Had to jump to an intermediate version and then was able to install the latest update.

jdargence · 07-25-2017

I'm not using a tar file. If you look at the archive download command, I'm using the ap1g4 file from the .zip file, and downloading it from the TFTP server. The file is not written properly on flash due to lack of space, so when the checksum is run, ...

Member Since	‎08-20-2010 03:46 PM
Date Last Visited	‎02-01-2023 12:18 AM
Posts	13
Total Helpful Votes Received	10

User Statistics

User Activity

1852e Upgrade Fails (from 8.2.100.0 to 8.4.100.0)

Caller ID Name breaks PRI

Re: ISE Smart Licensing problem

Re: ISE Smart Licensing problem

Re: ISE Smart Licensing problem

Re: Is this for a Mobility

I'm not using a tar file. If