About benjammin1001

benjammin1001 · 03-07-2024

Can anyone point to a definitive guide for best practices to set up older 2500 series (and similar) for Voice-over-WiFi?I've been having carrier problems lately - and I want to make sure I have all my i's dotted and t's crossed with my 2504 system as...

benjammin1001 · 09-14-2018

I have a WLC2504 running 8.5.135.0 - I know "bonjour" support was removed back in 8.0.something.Been playing with this and read the 8.5 config guide which seems to describe setting up mDNS and so on to support Apple devices.When I follow the directio...

benjammin1001 · 07-26-2017

I have a working C4506 with 2 UPOE Line cards and just added the X4748-SFP-E line card.The system shows the line card -- and I go configure it -- but the ports don't stay up.Normally, they are all populated with 48 GLC-MM-SX modules. sh interface for...

benjammin1001 · 03-02-2016

Hi All,I'm not new to Cisco and but I've got this shiny new 4506 chassis with a Supervisor 8E and single (for now) 48port UPoE line card.The config I have set up seems to be working, but some of the items we plug in for PoE don't seem to come up. (Th...

benjammin1001 · 03-08-2024

Thanks for the links, I'll take a look to see which ones I've already seen -- but sanity checks are good.And yea - they're all updated. I doubt the clients are going to move to the newer catalyst stuff any time soon. Always about the $$$.Again - app...

benjammin1001 · 03-07-2024

I already know > 1 carrier doesn't work at one location.And there's another single AP (Araknis) set up as a cross-test that seems to work fine with the same carriers.So I'd like to rule out the Cisco system.

benjammin1001 · 03-07-2024

Uhh... and what happens when it's more than one carrier?Not really a helpful reply.

benjammin1001 · 03-07-2024

Thanks for the reply.Yea - the firewall has no restrictions for the WiFi devices that should interfere with IPSEC/ESP other than NAT from an RFC1918 to public IP.And I'm aware of the various RRM and 802.11r/k/v -- but haven't found anything really de...

benjammin1001 · 08-10-2023

I realize this thread is old - but just to add (since I was just looking at the difference between the WLANs -> SSID -> Advanced option and the WIreless -> RF Profiles -> <profile> -> High Density -> Maximum Clients option....They look to be the same...

Member Since	‎02-26-2016 02:20 PM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	35

User Statistics

User Activity

Definitive Best-Practice for VoWiFi PDF (cellular calls over WiFi)

WLC2504, Bonjour and firmware 8.5.135.0

[SOLVED] Cisco 4506 w/WS-X4748-SFP-E with Crestron NVX Series 4k Video Encoder/Decoder, Links don't stay up.

[SOLVED?] 4500 Chassis w/SUP-8E & 48port UPoE card not forwarding port traffic without reboot

Re: Definitive Best-Practice for VoWiFi PDF (cellular calls over WiFi)

Re: Definitive Best-Practice for VoWiFi PDF (cellular calls over WiFi)

Re: Definitive Best-Practice for VoWiFi PDF (cellular calls over WiFi)

Re: Definitive Best-Practice for VoWiFi PDF (cellular calls over WiFi)

Re: Limit max of users connected to an AP