Hello,I wanted to ask your opinion regarding the best way to automate VXLAN/EVPN day 2 operations for NX-OS. I know there are multiple possibilities such as Ansible or Python.I am not a big fan of Ansible as I find it difficult to code in YAML when a...
Hi,
I know there is an optional Forwarding Address field in LSA5 and LSA7 in OSPFv3 :
"Forwarding Address, if included, is a fully specified 128-bit IPv6 address representing the next hop to the destination prefix. It is included only if the F Flag...
Hi,I cam accross a strange issue using guestshell and dohost: the dohost feature only retuns few lines. Have a look:guestshell@guestshell ~]$ dohost "sh ver"Cisco IOS XE Software, Version 16.06.01[guestshell@guestshell ~]$ dohost "sh run"Building con...
Hi, I am using an EzVPN architecture, and I have tried to force the EzVPN clients to use specific security settings for both IKE and IPsec (AES256/SHA256/DH14).It works without issue for IPsec, however I have not been able to make it work for IKE.Her...
Hi,
Not really a technical question, but "ask-smart-services@cisco.com" redirected me here.
We have some issues trying to create a Smart Account. When we try from software.cisco.com (and logged in), we get the error message 'Bad Request'. Screenshot...
Hi,
Thanks for sharing.
What is the expected IPsec throughput for IMIX?
Also what would be the advantages of this model versus the Catalyst 8500?
@lemontree_61089 , Hi, Up to 52 Gbps IMIX performance for SD-WAN IPsec with ASR1006-X platform. Mo...
Thanks. At this time, I believe there is no client VPN solution with Cisco SD-WAN. It is something on the roadmap or not at all?Use case would be to use a client VPN software to connect to the SD-WAN fabric when it is too expensive to chip a small SD...
