About BenzylAlkonium

BenzylAlkonium · 10-16-2012

I have Eight AIR-AP1242AG-E-K9's accross our site that have 2 SSID's and 2 VLAN's that work well, I want to link one of the AIR-AP1242AG-E-K9 to another one using 5ghz patch antennas across a 50 metre gap, but I am puzzled on how to do this, as to cr...

BenzylAlkonium · 10-17-2012

It Appears I will have to learn the CLI, because some of the GUI options just don't seem logical, like turning Radio1 to enable in the GUI does not always work, but the CLI command "no shutdown" works perfectly!

BenzylAlkonium · 10-17-2012

Hi Steve that did the trick. After I ran those commands through the CLI it all works perfectly.I am not that up on using the CLI and in the WebUI it would not let me assign the second VLAN on to Radio1.Thanks AgainMartin

BenzylAlkonium · 10-17-2012

Thanks I will try that, the second SSID is for open access for non staff and goes directly out via a DSL line that is seperated from the corporate network

BenzylAlkonium · 10-16-2012

configs attached as requested

BenzylAlkonium · 10-16-2012

Hi Steve I have the point to point Root Bridge to Non Root Bridge running on Radio1 and traffic on VLAN1 is functioning perfectly but I can't seem to route my second VLAN over it

Member Since	‎10-16-2012 02:00 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

Use 1242 5GHz to create wireless bridge

Re: Use 1242 5GHz to create wireless bridge

Re: Use 1242 5GHz to create wireless bridge

Use 1242 5GHz to create wireless bridge

Re: Use 1242 5GHz to create wireless bridge

Re: Use 1242 5GHz to create wireless bridge