About c.duck

c.duck · 12-15-2021

I have several 2960x series switches with IP routing turned off and the IP default-gateway command entered into them. IP default-gateway 10.1.1.254 However, they will auto-magically define their own routes to certain clients on a remote network i.e. ...

c.duck · 12-15-2021

Yes the VLAN shows 10.1.1.253sh ip int brief only list the one IP assigned to VLAN1Directly connected to the router via a TRUNK interface

c.duck · 12-15-2021

10.1.1.254 is a router and is pingable and routing the traffic for the switch as the default-gateway.

c.duck · 12-15-2021

Here is the sh ip route I do not feel comfortable posting a full running-config on a forum though and the IPS have been changed here to protect the innocent. AI17-SW2#sh ip routeDefault gateway is 10.1.1.254 Host Gateway Last ...

c.duck · 09-21-2012

Yes that is the Demarcation point for your service provider. If you we're to run a cable to a closet from this point that would be the demarc extension.Sent from Cisco Technical Support iPad App

c.duck · 06-29-2012

What part is being set in bold?CurtisSent from Cisco Technical Support iPad App

Member Since	‎11-04-2004 03:16 PM
Date Last Visited	‎05-30-2023 07:22 AM
Posts	8

User Statistics

User Activity

Cisco 2960X set its' own gateway

Re: Cisco 2960X set its' own gateway

Re: Cisco 2960X set its' own gateway

Re: Cisco 2960X set its' own gateway

Re: Is this a Demarc?

Re: Cisco 2911 with multiple Internet connections