Fabri_Fabri
Level 1
Level 1
Member since ‎10-19-2012
‎08-18-2017

User Statistics

  • 43 Posts
  • 0 Solutions
  • 25 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
10 Replies
5 Replies
20 Replies

User Activity

Hi, I need to configure ip helper address to use a dhcp server that is on a different vlan than clients. Our switches have C2960S-UNIVERSALK9-M image but it seems that ip helper is not there. Can you please help ? Thanks,
Need to update IOS firmware on 2960 and 3560 and I wonder if upgrade process is different using the image with "WEB BASED DEV MGR".I did a few upgrade with the BIN image without web based dev mgr and all worked well.Instead, I noticed that a TAR file...
Some colleagues notified me that RDP connection they are using hiccups. Windows draw after a second and so on.Those colleagues are in a branch office connected to a 2960s that is also connected to a 2960 located in headquarter office via dedicated li...
(TL;DR - Traffic shaping is the solution to avoid total output drops ?)Hello,we have 2 offices connected via a layer 1 SDH link of the provider. Link speed is 100MB.From each side, it connects with our 2960 Cisco.QoS is disabled on both 2960.Each tru...
Hi,I am trying to configure LACP through 2 Cisco switches 2960s.This is my configuration:SW1 & SW2===========================interface GigabitEthernet1/0/47 description PORT_CHANNEL switchport access vlan 9 speed 1000 duplex full channel-protocol lac...
Community Statistics
Member Since ‎10-19-2012 03:42 AM
Date Last Visited ‎08-18-2017 03:55 AM
Posts 43
Helpful Votes Given To