About thefranmaneds

thefranmaneds · 12-28-2008

I am playing around with 6.0.1 in the lab and I am not having any luck. I have it up and run but I can't get my 7970 to register. I can ping the phone from CCM and my DHCP option 150 is point to the CCM (dhcp for the phone is being hand out from th...

thefranmaneds · 11-12-2008

Do the FA0/0 and FA0/1 support auto-mdix. I am having issues at a site with a 2950 connecting directly 2811. I am not sure what kind of cable was used.

thefranmaneds · 10-01-2008

I was wondering why you can set your speed to a static entry and your duplex to auto or set your speed to auto and your duplex to static? This would be on IOS. I thought I recalled back on CatOS it would give you an error message if you tried to se...

thefranmaneds · 08-28-2008

Does the 2960 support tftp when it rommon mode? Can you set a 2960 to download it's image from a tftp server? If not is there any other way to get he bin file on the switch without waiting for xmodem?Thanks

thefranmaneds · 08-27-2008

Is there any reason why this command wouldn't work on a 3560 ip-base switch?C3560-24#test cable-diagnostics tdr interface fastEthernet 0/10% TDR test is not supported on interface Fa0/10Here is the config of the interface.interface FastEthernet0/10 s...

thefranmaneds · 10-20-2012

I am guessing the samething but have you every heard of the indoor/outdoor FCC rating before?

thefranmaneds · 11-10-2010

2 years later I found the answer... from the cisco books. The G will client will run at G speeds even if there is a B client.Now that the cell knows about the 802.11b clients and the protection mechanism has beeninvoked, the way that data is sent wi...

thefranmaneds · 12-29-2008

I have a Trace and a Tools drop down in "Cisco Unified Serviceability" but it doesn't have a Trace and Log Central. Is there somewhere I need to enable it?

thefranmaneds · 12-10-2008

2960Understanding TDRYou can use the Time Domain Reflector (TDR) feature to diagnose and resolve cabling problems. When running TDR, a local device sends a signal through a cable and compares the reflected signal to the initial signal.TDR is supporte...

thefranmaneds · 12-10-2008

What is odd is that does work on 10/100 ports. I though it was the different between SI and EI code but it doesn't seem to be. The switch it is working on is a 3560-8 and we also have a 2960 that it is working on.

Member Since	‎02-26-2008 08:35 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	16

User Statistics

User Activity

Cisco Unified Communications Manager Administration 6.0.1... logs??

2811 Auto-MDIX

auto negotiate

2960 rommon tftp?

% TDR test is not supported

Indoor vs Outdoor FCC rated APs

Re: G wireless throttling down for B clients

Re: Cisco Unified Communications Manager Administration 6.0.1...

Re: % TDR test is not supported

Re: % TDR test is not supported