Hi,I am wondering what the status of the query vlan interface means in the command 'show ft peer detail':Query Vlan IF State : UP, Manual validation - please ping peerI am pretty sure that I did not see this status when I configured query vl...
Hi all,I have the issue that my ACE does not seem to allow tcp options with L7 proxied connections to the servers. For the client side connection I see the TCP option timestamp for example, but unfortunately the ACE itself does not put the timestamp ...
hi all,we noticed considerable longer response times for https-sessions using advanced-balance ssl than accessing the server directly. we use a css 11501 (without ssl module) and in the worst case we see about 3-4 times longer response times with the...
Hi! I am a little bit confused about the configuration guides concerning csm + fwsm + csm bridged mode. in my opinion when using bridged mode with the csm i do not really need any alias ip configuration - neither in the client vlan nor the server vla...
hi all,we have a standalone content engine 565 running acns 5.3.1. we would like to realize something like a live stream 'relay': we place the ce on the network edge and it receives a live stream (rtsp) directly from a content provider. the internal ...
Hi,This issue is pretty likely caused by a Bug existing in NX-OS 4.x and 5.x: CSCti07871A workaround is to completely remove the SNMP community configuration and reapply only the necessary part.Regards,Daniel
Hi Gilles,In this matter I just realized that it even does not seem to be possible to configure a static route in context A for real server network behind context B pointing to any address that is active in context B. In fact you can configure the st...
Thanks Kevin!That is clear so far.The only downside I see is that in this situation only the remote side can trigger the tunnel-setup.What if the headend needs to send the first packet?That does not seem to be a perfect workaround for the redundant L...
Hi,I am facing the same problem as you.One thing that I am interested in: you are saying that using dynamic crypto-maps on the headend solved the problem.When I understand this correctly, then then the 2 redundant remote-routers at each site initiate...
Hi Gilles,Thanks a lot for that clarification - that helps me a lot. I'll talk to the Austrian account team in case the customer insists on it.Best regards,Daniel
