Hi,I recently setup a WLAN for 400 users in a single office using flexconnect, the APs are 3500s and the controller is a 5508 in one data centre. There are 25 APs in this office to support the number of users.I created a /22 network for the Flexconne...
Hi All,I'm planning on configuring flexconnect for 25 access points and I want to check what affect broadcasts will have from the local area network connecting to the Flexconnect APs. I will have a /23 network configured on VLAN 10 which will be tagg...
Hi Support,I'm looking to deploy secure connect using certificate based authentication using my Microsoft 2003 root CA. I'm aware that secure connect only supports a 2008 CA. Can I just deploy a 2008 subordinate issuing CA or will I need to upgrade m...
Can someone confirm that Apple iPhones/iPads only support uninterrupted roaming on a Cisco wireless network using PSK authentication?If we want to use 802.1x authentication is CCKM required?Thank you
Hi,I'm desiging the attached infrastructure.We have 2 sites, each with 2 x 4506 switches which will be connected togther using an etherchannel. The switches will provide access ports for client devices and will be configured with HSRP to provide gate...
Hi Douglas,I actually need to setup both iPhone and Android to use certificate based authentication, I understand that if I want to use SCEP that I need a Windows 2008 CA but what I need to understand is if both the root and subordinate issuing CAs ...
Thanks guys.Whats the typical recomendation here? This deployment will have roughly 15 access points configured in hreap per site. Is there anything that can be done to make i devices more robust when roaming? The sites will only support 100 voice u...
Ok. We are currently using hreap with 802.1x authentication and there is delay when apple iphones running mobile 8 roam. If iphones dont support CCKM, will standard WPA with PSK be ok? Will the reauthentication be quick enough that devices wont noti...
Thats great.Yes, each of the switches will have dual SUP modules so the etherchannel will be formed by connecting the 1Gbps ports on SUPs as SUP1-SUP1 and SUP2-SUP2.
Thanks you for this.The diagram displays the only OSPF routers in the topology so the infrastructure is not very complex.Regarding unicast flooding, is there anyway to prevent this with this design? I assume that unicast flooding can be caused when ...
