Hi CommunityWe are currently Setting up a c240 standalone Server, installed with a vic1225 (connected to a nexus 5500 vpc pair).We have bare metal windows 2008 R2 os installed and enabled nic teaming ((802.3ad) with the enictool.Now we want to setup ...
Hi Community,We try to add New hosts to an existing N1kv.vem Module is installed successfully, but when we try to add the host in vcenter, we get the following error Message:vDS operation failed on host xxxxxxx, An error occurred during host configur...
Hi All,i have a problem with a GLC-T SFP inserted in a FEX 2232 PP which is connected to a Fabric-Interconnect 6140 in a UCS managed environment.I get the error message: "spf operation failed".If i insert the same SFP in another Port on the Fex 2232...
Hi,the Palo Adapter (M81KR) supports only 54 dynamic vnics per server-profile.Stupid question: Does this mean, in a vm-fex (formerly vn-link in hardware) environment, i can assign maximum 54 VMs per ESXi Host? Currently we have the problem, that a vM...
Hi Parma,Finally only Option 3 is valid for us.We Start with two VNics, teamed them with enictool (Option 4 lacp) and it Works.Then we Added two further VNics and teamed them too.In this Moment, the portchannel went Down and nexus Outputs lacp error....
HI Spankar,a reboot did not help. The new host has the same ESXi version as the other 16 Hosts, which are already running with N1kv.We have opeend a Case at VMware....KR Gregor
padramas,i am not talking about the uplink between FEX and FI.I am talking about a Server Port on the Fex!!!The Uplinks are working fine with Twinax 5m Cables.
Hi Robert,we have IOM 2104 with four uplinks...so we should be able to use the maximum # of 54.We have about 30-35 VMs running, each with only one NIC, so we shouldn`t hit this limitation.We have a case opened with VMware but Cisco will be involved n...
