Hi All,I have a CUCM 8.6 which was upgraded from CM 4.1 to CUCM 8.6 about few months ago by another colleague of mine. The person has left the company, and the CUCM 8.6 has not come up into the production network.Between that time till now, there has...

Hi all, Hope someone could help me in this. I've set a rate-limit on the CE router at 6Mbps. However, using software to generate traffic at 10 Mbps would push the limit of the line at 5.2-5.4 Mbps, 15-20% lower than the maximum bandwidth. I know that...