Hi,I have read the following document from Cisco website expaling the theoretical throughput of Cisco Routers.http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdfWe have to select Routers based on our WAN links B...
Hi All,Please guide me which Router should be purchased for DSCP Marking (QoS) with at least 2 FE Interfaces & Traffic is Video Traffic of about 80Mbps. Also please guide if standard IP IOS will do the marking or Advanced IP IOS required ?What about ...
1.Can a Bridge BR-342 act as a repeater to extend the range ? 2.If 2 bridges are in root mode with same SSID,to which bridge the client bridge will associate if all the three of them are using omnidirectional antenna ?Thanks for your help.faisal@skyk...
Can 2 Bridges (BR342) communicate when both of them are in root mode ?Also if they communicate,how a client can be associated with one of the bridges working in root mode ?Regards,faisal@skykom.net
We want compression on our WAN link which is on serial Interface. We have 3640 Router at our end and the remote end router is to be purchased. I have found from the Cisco Website that for 3640, NM-COMPR Compression Network Module can be used for Comp...
Hi Marwanshawi,Thanks for your reply. It is about detailed specifications of the Router. I just wanted to ask, if we buy a Cisco Router these days with Standard IOS, will it do the DSCP marking or you require Advanced IOS ?I have already go this poin...
You have to connect the other end of your Console Cable to your COM Port of your PC.There is a convertor (RJ45 to DB9) available.You can use Hyperterminal in Windows to communicate with the router through console cable.