About ciscovnetengineer

ciscovnetengineer · 12-04-2025

hi expert,Cisco ATA 191 lose Web Access GUI after register to UCM 12.5Does anyone know why and what config cause it? As soon as it register , then It is not accessible in Web GUI.I have enabled the web access and also set admin password on UCM page,...

ciscovnetengineer · 06-04-2025

hi Expert,When configure VG410 in UCM 12.5 for SCCP, I don't see option for VG410 (only see VG400 and VG450)Should we select VG400 or VG450 in UCM for SCCP? and what is the different?Tks,V

ciscovnetengineer · 10-20-2024

Hi expert,We have Cisco CUBE connect to other company as SIP trunk. Design below:------------Phone A -- 3rd Party PBX --- SBC --- WAN --- CUBE SBC --- Call Manager --- Phone BWhen I do test call, the SIP call flow as below:-----------------------...

ciscovnetengineer · 09-09-2024

hello expert,Anyone know if renew Call Manager 12.5 Tomcat certificate will impact UCCX and Finesse? and what need to be done?Thanks,J

ciscovnetengineer · 08-23-2024

hi experts,We have 4 CUBE that connect to different SIP trunk provider. We don't have documentation on what DID range terminate to each CUBE trunk. There is no configuration note on CUBE on what circuit number and DID, also we can't trust the dial-p...

ciscovnetengineer · 12-04-2025

I had enabled these 2 setting and reboot, but still same not able to web gui

ciscovnetengineer · 10-25-2024

hi Roger and Nithin,Thanks for input here, I just about to send the config for you, however we figured out the issue, it is interface for dial-peer. We need to use different interface for UCM and the B2BThanks againV

ciscovnetengineer · 10-21-2024

Btw, Cisco CUBE functionality is enabled. Do we need to manipulate the SIP profile , so UCM not come in picture?

ciscovnetengineer · 10-21-2024

Thanks Nithin,The audio is happening from Phone B to Phone A using same route. Possible codec issue or other things? RgdsV

ciscovnetengineer · 10-21-2024

hi Roger,a. The SIP call flow is from 3rd party SBC view point ( not from Cisco CUBE)b. According to 3rd party SBC vendor, the reason of one way audio is their SBC dont want to communicate with UCM ( only with Cisco CUBE SBC), is it possible ? and H...

Member Since	‎08-11-2024 05:13 PM
Date Last Visited	‎12-08-2025 02:30 PM
Posts	18
Total Helpful Votes Received	3

User Statistics

User Activity

Cisco ATA 191 lose Web Access GUI after register to UCM 12.5

Cisco VG410 SCCP Gateway registrations on Call Manager 12.5

CUBE - One way audio

UCM 12.5 Tomcat certificate update affect UCCX and Finesse

Check DID range that come to CUBE from SIP provider

Re: Cisco ATA 191 lose Web Access GUI after register to UCM 12.5

Re: CUBE - One way audio

Re: CUBE - One way audio

Re: CUBE - One way audio

Re: CUBE - One way audio