hello experts
i need your help
I administer a catalyst switch 6500 virtualized in vss, I need to know the cpu levels of these switch, Because it has a total consumption of 80%, and interruption 16% For periods of time of 20 or 30 minutes and then d...
good afternoon
i need you help
I have 2 switch 6509-E running vss
I need to update the ios version of the sxi4 to sxi14,,,,,, the problem is I have no redundancy with the remote host that manages the vss.
ie the host is connected to the switch 1 ...
Good Afternoon,
I have the following problem,
I have a vlan configured on a border router that connects different branches, the problem is that it is the same vlan for all branches and edge router. I seek to apply QoS to ensure voice ip, I know how ...
ok thank you very much
Now what are the appropriate cpu levels for a 6500 switch
Ej:
0-60% Normal
60-80 % warning
80-100 % critical
Please some cisco document that indicates this since I need to back up with the client
hello
Attach command on the vss switch
CPU utilization for five seconds: 89%/25%; one minute: 83%; five minutes: 79% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 532 38996600 55663348 700 18.87% 17.39% 15.71% 0 ...
ok thanks for the recommendation take this into account. another question friend there any way to watch the traffic crossing in a gre tunnel or DMVPN through netwflow ??
thank you sir joseph, we investigate some solution we find the following. gre tunnel in metroethenert links with the same vlan the tunnel ensures a point to point between the branches and the edge router. QoS is applied to the tunnel and the policy m...
