Hello All,Just need a simple setup - 2 VLANs, a few ports each, on each unit, trunked together (ultimately on SFP module). Tried what seems to be right but (natch) not working. Just need simple guidelines to see where am going wrong. Thanks!
OK, well, using that example, as well as another thread here (Cisco SLM224PVLAN TRUNKING), I reset and redid all the VLAN related settings.There are 2 subnets in play here -10.51.0.0/255.255.252.0 - VLAN 1 - Used as the Management VLAN.10.51.4.0/255....
OK, that example has some issues, but I think I see what is being done. Pretty much what I had set up, but will compare closely...One additional question though. In the example, a one-port LAG is used as an alternative.Is there an advantage (OR diffe...