Hello and thanks for reading.I have two Internet connections, and I'd like to use them like this: One of the LAN and a second one for VoIP and wireless visitors.I have only one Cisco 3560 (192.168.100.254), one firewall that is the default gateway (1...
Hello and thanks for reading,I need to provide Internet wifi access to our visitors in the office while keep our network safe.We have one Cisco 3560, I've created one VLAN for VoIP and assigned several ports to it, in these ports I attached the VoIP ...
Hello and thanks for reading!We have two different Internet providers in the office. We use one of them only for the VoIP. In the switch (Cisco 3560) I have 10 ports in a different VLAN (phones, PBX and the Internet router). The problem is that I wan...
Hello and thanks for reading my post,I've just configured two different VLANs (plus the default one) in my 3560G switch, I can ping from any VLAN to any host in other VLANs, but I cannot see the computers, do you know why?.I created the VLANs to isol...
I'm trying to setup interVLAN routing in my 24 port 3560G switch.I used the Cisco Network Assistant to create the VLANs and assign them IP addresses like this:VLAN 1 (default) 192.168.131.254 (the switch address) 255.255.255.0 VLAN 100 192.168.100.1 ...
Hi and thanks Manas,The subnet of the internal lan is 192.168.100.0/24No, I can't ping the firewall from the devices connected wirelessly, I guess this can be because the wifi router is plugged in a port that is assigned to a different VLAN?The firew...
Hi dvangyzeghem,Yes, sorry for the misunderstanding, the internet connections are attached to the routers, one in the router1 and the other in the wifi router. From the router there is a cable that goes from the router to the WAN port of the firewall...
Hi Manas, thanks for answering,The LAN router is also a Cisco 800.I have plugged one of the Internet connections to the firewall (its a Zyxel ZyWALL USG) and the wifi router is plugged to one port (in one of the the VoIP VLAN ports) of the 3560 switc...
Thanks for the answer dvangyzeghem,Well yes, the wifi router should be the access point (I guess)The wifi router is a Thomson cheap SOHO router. This is the "show run" command output of the 3560 switch:************************************************...
Thank you VERY much. We don't have any server in our small office right now, but my next duty is to install one new Small Business Server 2008 box next week, so I hope it will solve my inter-VLAN browsing problems.Cheers,Jud
