My network is dual-homed to different providers, but one of the provider links is constantly running close to max bandwidth during peak working hours. Prior to upgrading bandwidth or making other changes, I would like to use local-pref to push a spec...

I've read several places where it's been said that configuring the individual ports in an etherchannel as opposed to the port-channel interface has the potential to cause loops. I've also recently seen this happen due to an engineer making that same ...

Has anyone noticed a 3750 stack where all of the port status lights blink simultaneously? If so, has anyone tracked down the root of the problem?Could you share any details on what the fix could be, or even for those who haven't seen it....maybe a li...

Can anyone give me any insight into this error?:xxx>sho ip traffic | inc encapsulation Drop: 36177634 encapsulation failed, 109 unresolved, 0 no adjacencyThis error is increasing...

I run this command and get 'Net background' as the number one hitter right now for a 3825 that's running at 38%. Anything unusually high about that. I've read what's incorporated in 'Net background' but haven't looked to see what is 'normal'...Thanks...