About thabiso.mathabathe1

thabiso.mathabathe1 · 10-02-2017

Hi All, Please help me with some things I need to consider if I want upgrade my DCNM server from 6.3(2) to 10.3(1) Best Regards, Thabiso Mathabathe

thabiso.mathabathe1 · 08-14-2017

Hi All, Please help a fellow friend. I am currently in the middle of a SAN migration from MDS9513 to the New Cisco SAN Director Switches. Please see (PDF) attached my current SAN infrastructure. With the current configuration there's a total of ...

thabiso.mathabathe1 · 07-10-2017

Hi All, I have recently completed the installation of ISL links, after the initial configuration they were all ok, until I checked them again this morning and to my surprise I saw the errDisabled error on two links. Please help me with the resoluti...

thabiso.mathabathe1 · 03-28-2017

Hi All, May I kindly ask for some expert advice: I see the below (Highlighted in Red) on our DCNM Web Client: ISLsTue Mar 28 14:28:10 SAST 2017 GroupVSAN/VLANsFrom SwitchFrom InterfaceTo SwitchTo InterfaceSpeedStatus1Fabric_TECFABA10TECFABAfc5/7FA...

thabiso.mathabathe1 · 11-16-2016

Hi All, May I humbly ask for your urgent assistance. We cannot access the DCNM GUI anymore, We get an application error everytime we try and access the system. However the Switch Device manager is working fine. Please note that our DCNM is install...

thabiso.mathabathe1 · 07-17-2017

Hi Walter, I trust you are well today. Please see attached pic with cable information and advise if the cable in use is appropriate for the Long-Wave Inter-Switch-Link connection. Best Regards, Thabiso

thabiso.mathabathe1 · 07-13-2017

Hi Walter, I trust this comment finds you well. Please assist as to why we get the Bit-Error on the ports? On your previous comment you mention that "ignoring the Bit-Error" on the switchport does not help and might cause issues in future. How do I...

thabiso.mathabathe1 · 07-11-2017

Hi Walter, I believe that is the earlier response before I ran the "switchport trunk allowed VSAN all" command: Herewith latest output: FABBCOMPARK# show int fc6/29fc6/29 is trunking Hardware is Fibre Channel, SFP is long wave laser cost reduced Po...

thabiso.mathabathe1 · 07-11-2017

Hi Walter, With regards to the fc6/29 and fc1/48 config info: The problem was that fc1/48 only allowed VSAN 2 to trunk. I ran the "switchport trunk allowed VSAN all" command and sorted.

thabiso.mathabathe1 · 07-11-2017

Hi Walter, As requested: Herewith Port details for fc6/29 and fc1/48 FABBCOMPARK# show int fc6/29 transceiver detailsfc6/29 sfp is present Name is CISCO-FINISAR Manufacturer's part number is FTLF1428P3BNV-C1 Revision is A Serial number is FNS19491...

Member Since	‎03-14-2016 03:18 AM
Date Last Visited	‎10-11-2017 07:44 AM
Posts	24

User Statistics

User Activity

Upgrading DCNM - From 6.3(2) to 10.3(1)

Cisco SAN Migration - Best Approach/Migration Plan

ISL Trunks errDisabled (bit error rate too high)

DCNM Warnings and Alerts

DCNM GUI Error - Application Error

Hi Walter,

Hi Walter,

Hi Walter,

Hi Walter,

Hi Walter,