Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
gcarson73
Level 1
Level 1
Member since ‎03-14-2016
‎12-26-2019
Recent Badges
Awards

User Statistics

  • 43 Posts
  • 2 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
See all
20 Replies
1 Accepted Solution
10 Replies
5 Replies

User Activity

AWS Site to Site VPN

12-13-2019
I have an AWS site to site VPN set up but cannot access the instances in AWS.  The router used to connect the AWS Site to Site is a Cisco 2951, IOS 15.5.  Private subnet on Cisco Router is 10.3.81.0/24Private subnet for AWS is 10.2.10.0/24. From Wind...

IP_VFR-3-OVERLAP_FRAGMENTS: GigabitEthernet0/0: from the host xx.xx.xx.xx destined to %mypublicIP%

08-03-2018
Cisco 2951, Version 15.5(3)M5 *The public IP is NAT'd.   Production router in use for years.  I received the below message from my syslog server today.   *Aug  3 05:12:11.048: %IP_VFR-3-OVERLAP_FRAGMENTS: GigabitEthernet0/0: from the host xx.xx.xx.xx...

No access to inside Interface, but restart fixes access

12-21-2016
I have a Cisco 2951 Router, Version 15.0(1)M3.  It has been in production for 8 months, with no issues. In the past week, I have had to reboot it twice.  Every single server, laptop, and VoiP phone went down (no internet), I was not able to ping the...

Static Nat stops working

04-03-2016
I have 13 public IP's, NAT/PAT to HTTP,HTTPS, RDP ect.....  I am using a Cisco 2951 with Version 15.0(1) M3. My FTP server IP is 10.3.81.7 and the public IP for it is 99.3.81.72 About every 6 hours, I have to use the commands no ip nat inside sour...

Switch to Router Port Channel

03-28-2016
I have one Cisco 2951 router and a Cisco 3750 switch.   The router has 3 GB interfaces, 1 interface to the ISP and 2 that I can use for a port-channel to the switch.  I cannot do any testing, since these are used in my "production" environment.  Any...
View more
Community Statistics
Member Since ‎03-14-2016 06:12 AM
Date Last Visited ‎12-26-2019 02:26 PM
Posts 43