We are looking at possibly placing some GLC-T (Copper SFPs) into the 3560-E 12 port 10GigE switch. We would install the CVR-X2-SFP to get two 1GigE ports from one 10Gig-E switch port. I am wondering if the GLC-T will be supported in the converter and...

     We are looking at deploying many Cisco 9971 IP phones. On the specs for the 9971 phone it says it uses class 3 power, but this usually reduced when CDP is enabled. Does anyone know what the actually power usage (xx.x watts) of a 9971 IP phone? W...

We are currently running IOS from 12.2(35) to 12.2(50) on either a Cisco Catalyst 3750 or 3750v2 switches.Is it possible to trust both CoS and DSCP on the switch ports at the same time as seen in a exampleconfiguration below. The reason we would like...

I have read many of the data sheets on the Nexus switches about FCoE.The comany I work for also has FICON as well. Does the Nexus switchseries have support for FICON? If yes and what speed? What modulessupport FICON, with how many interfaces on the m...

We have deployed ARP inspection withinour access switches (Cisco 3750's w/ IOS 12.2(35)). We had no issues running ARP inspection with no modification to the standard thresholds, until we started deploying Window 7.When a employee does searches withi...