I keep getting this response from all 3 ESX 4.0.0. build 208167 servers:[root@viewesx1 tmp]# esxupdate -b ./cross_cisco-vem-v110-4.0.4.1.2.0.80-0.6.179-release.vib updatecross_cisco-vem-v110-4.0.4.1... ######################################## [100%]U...
I have a couple of questions on the VSM - is this deployed on a per-cluster basis or per-datacenter within vSphere? Currently I have a cluster of rack mounts within vSphere that are currently on the Cisco 1000v distributed switch. We created a new cl...
I think you're specifically going to be challenged as the virtual media interface is tied to the Avocent underpinnings for KVM which has nothing to do with the API. I think you're better off leveraging PXE to do the jump start install.hope this helps...
Thanks!I had to first disassociate all of the VM's attached to the DVS for that ESX host and then was able to disassociate it from the DVS. Once I re-added it, everything came up fine. Thanks for the command help.N1000V# sho module vem mapMod Sta...
The new cluster is a UCS blade enclosure. I have 2 B200's dedicated and I've ensure all of the appropriate layer2 adjacencies are in place and forwarding. What is curious is I did a reload of the VSM and then one of the 2 blades was able to register ...
