About bbriggs

bbriggs · 03-24-2020

Hi, I am trying to build an ADSL lab. I have attached my planned ADSL config for the remote\client router. My aim is to use either GNS3 or VIRL.Is there a way to create a genuine ADSL network using simulated hardware or is an ADSL line from a Provide...

bbriggs · 03-21-2019

Hello, I have joined a new organisation which is using older NAC configuration on their switchports. I am looking to amend this however does anyone have a template for NAC in older switches using the following types of commands rather than the more...

bbriggs · 08-28-2018

Hi, I have a task to swap-out two ASA single-mode firewalls. They are in a pair and neither has failed, this is merely a hardware upgrade. I am tempted to failover i.e. enter "no failover active" and replace the Primary unit first. However if I left...

bbriggs · 02-20-2017

We are using a default Wired_MAB configuration. As I understand it a device tries to authenticate and as part of this the identity store i.e. the local internal identity store is queried. If this is a new device it isn't in the Identity Store, howeve...

bbriggs · 08-07-2015

I have taken over a solution which employs MAB for wired devices which are not configured for dot1x e.g. some IP Phones.The laptops are all dot1x compliant and they must be using dot1x to access the network.The MAB devices are recognised as such and...

bbriggs · 04-14-2020

Hi Cristian, I have now managed to get into that document.That document however outlines how to configure an ADSL router to connect to an ISP, I'm trying to simulate the termination\connection of the ADSL line into an ISP.I suppose you could say that...

bbriggs · 04-14-2020

Thanks for that Cristian,However I get an error when I click on it, ForbiddenAn error occurred. Please contact your System Administrator.

bbriggs · 04-07-2020

THanks for that.My problem however is that in real-life, I will be using an ADSL line.I want to configure the ADSL, then run a VPN over it.I know how to configure VPNs but haven't done it over a Cisco router with an ADSL.THanks

bbriggs · 03-26-2020

Thanks, Interesting however i'm trying to replicate a live Prod solution which will have an ATM interface on the client router. Cheers

bbriggs · 03-26-2020

Thanks, I'm trying to simulate a "standard" ADSL configuration based on a Cisco 927, this will be my live environment.The connection to the ISP will be ATM and that is what I'm trying to simulate i.e a single router with a direct ADSl connection to t...

Member Since	‎07-28-2003 04:02 AM
Date Last Visited	‎07-14-2023 12:05 AM
Posts	22

User Statistics

User Activity

ADSL LAB

Issue with AP's disconnecting

Procedure for Swapping out live firewalls in a failover pair

MAB Authentication operation and its interaction with Authorization

MAB, MAC spoofing and Reprofiling,

Re: ADSL LAB

Re: ADSL LAB

Re: ADSL LAB

Re: ADSL LAB

Re: ADSL LAB