Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About campbell-john
11-22-2018
Stats
Member since
02-21-2008
23
Posts
0
Helpful
0
Solutions
11-15-2018
01:19 AM
Hi,
We've ran with this for a while now and so far it seems to have worked.
Just enter
mac address-table static xxxx.xxxx.xxxx vlan xx drop
... View more
03-21-2018
01:56 PM
I will give it a go and see. I have a feeling that port-security will lock out the port before the filter takes effect. As it's intermittant it might be some time before I can report back. Fingers crossed this stops it.
... View more
03-21-2018
11:39 AM
Thanks, I will try that and report back. Does this then apply before port security so a port should now no longer lock out?
If a match takes place does it get logged anywhere?
... View more
03-21-2018
09:41 AM
Hi,
We currently have about 60 C3560 switches and about 300 desktop machines that have port-security applied to them.
For a few weeks now we have been experiencing random port lockouts due to an rogue mac-address and for the life of us we can't figure out where it is coming from.
The desktops are all DELL but are different models, running Windows 7 on a domain as with the other 300 machines.
It's always the same mac address regardless of the machine. It's also affecting machines on different physical locations and switches.
The mac address is always 4000.0100.0000
Can anyone advise on how to track this one down? - Checks of the machines don't turn anything up so we're stumped. It's also random and intermittent.
All switches are running the latest IOS
I have also found that if i set the port limit to two and put on sticky it still locks out.
... View more
Labels:
Created by
campbell-john
in Optical Networking
in Optical Networking
12-23-2017
04:42 AM
12-23-2017
04:42 AM
Hi,
I have two servers in a data centre (one is a backup) linked to the same 3750 switch. I have another server in a building roughly 200metres away connected to it's own 3750 which is then linked to the data centre 3750 via a 1000SX SFP on multimode fibre. The link is up and stable at 1Gb.
As the fibre link carries voice most of the time there isn't an issue however a few times a year I have to move a few 4Gb files from the server in the DC to the backup (also in the DC) and a 4Gb file from the remote server to the backup server in the DC.
What I always find interesting is the throughput over the fibre which is much lower than I think it should be.
Could someone explain if this is normal or not?
For the purpose of the below, Primary and Backup are in the same building connected to the same switch at 1Gb. The Secondary server is in the remote building connected to a switch at 1Gb with a 1Gb link between the two switches. Every link is 1Gb
Primary Server in DC
Backup Server in DC
Secondary Server in Remote Building
Data Transfer Rates (shifting the same single 4GB file)
Primary to Backup > 9500kB/s (MAX)
Secondary to Backup > 4100kB/s (MAX)
Why is the fibre throughput slower?
I have checked all port configs, all are reporting good, no errors on any links, configs are all standard accross all ports.
Thanks
... View more
Labels:
08-11-2016
12:42 AM
Hi,
We have 8 VG224 units and unfortunately after a lightning storm we now have 15 faulty ports across all 8 units.
Some are dead but the majority are just static noise. When lifting the handset it doesn't trigger the 'Act' light or any other form of event (nothing in the logs)
I assume these are now beyond repair or is there any sort of protection on the board that can be reset or replaced?
We have got round the immediate problem by moving lines to spare ports or completely changing out the units
Thanks
... View more
Labels:
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
11-16-2014
06:12 AM
11-16-2014
06:12 AM
I have two Asterisk based VoIP servers and each has an E1 card installed. One is a primary and the other a secondary (standby). I am in the UK and have 1 ISDN E1 line from BT giving us our incoming/outgoing calls. At the moment this is hard wired to our primary however if there is a failure with the primary it's a manual shift to the secondary. I would like to automate this. I have been looking at dedicated E1 failover units but these are either very hard to come by or horrendously expensive I've therefore just had a thought but would like some clarification from the Cisco forum as to whether this would work or not. I have a Cisco 2901 with 2 WIC cards giving 4 E1 ports. Is it possible to configure this to act as an E1 failover? I'm not wanting to convert anything to IP, I want it all done with E1, so for example: BT Line in goes to WIC port 1 WIC port 2 has primary WIC port 3 has secondary Primary and Secondary can both make outgoing via BT line however only port 2 is receiving incoming from BT, however if there is a loss of service on the primary all incoming from BT then routes automatically to WIC port 3 It all sounds plausible to me but as I said I don't want to do any conversion to IP as there is sensitive modem traffic and would like to minimise this as much as possible. Any advice would be greatly appreciated Thanks
... View more
Labels:
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
10-22-2012
02:52 AM
10-22-2012
02:52 AM
anyone?
... View more
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
10-19-2012
02:56 AM
10-19-2012
02:56 AM
Hi Everyone, Alcatel ---> 2901 (3xxx) <-----------------Fibre IP LINK---------------> 2901 (in Data Centre) ------->Primary IP PBX The above is a basic network diagram. I have been working on linking an Asterisk based system to an Alcatel 4400 for over a year now which has gave me nothing but problems that have all been Cisco related. I have ironed them all out apart from 1 and I am completly stumped - I would really appreciate some help. Scanario: Alcatel handset rings an IP handset - Call established. Alcatel handset wants to transfer call to another Alcatel handset so they enter number. At this point the Asterisk MOH kicks in and plays to the IP handset. Alcatel handset puts call through and hangs up but MOH does not stop on IP handset however there is one way audio. The Alcatel handset can hear the IP handset but the IP handset is still listning to MOH. I found that I can fix this by setting session protocol sipv2 against the dialplan but it stops calling/called names passing up the trunk. I would like to leave it set to session protocol cisco which allows all names/calling names etc to pass. Config files: Alcatel Router: version 15.0 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname C2901_A_ALCATEL ! boot-start-marker boot-end-marker ! card type e1 0 1 logging buffered 51200 warnings ! no aaa new-model network-clock-participate wic 1 network-clock-select 1 E1 0/1/0 ! no ipv6 cef ip source-route ip cef ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! ! --More-- Oct 19 09:53:48.476: %SYS-5-CONFIG_I: Configured from console by itadmin on vty0 (10.11.0.50) ! ! isdn switch-type primary-qsig isdn gateway-max-interworking ! ! ! voice-card 0 ! ! voice call send-alert voice call convert-discpi-to-prog voice call carrier capacity active voice rtp send-recv ! voice service voip qsig decode fax protocol pass-through g711alaw h323 h225 timeout setup 2 h225 display-ie ccm-compatible ! voice class codec 1 codec preference 1 g711alaw ! ! ! ! license udi pid CISCO2901/K9 sn FCZ160990PE hw-module pvdm 0/0 ! ! ! ! redundancy ! ! controller E1 0/1/0 pri-group timeslots 1-31 ! controller E1 0/1/1 ! ! ! ! ! interface GigabitEthernet0/0 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$ ip address 10.0.0.52 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip address 10.11.0.55 255.255.255.0 duplex auto speed auto ! interface Serial0/1/0:15 no ip address encapsulation hdlc no logging event link-status isdn switch-type primary-qsig isdn timer T203 30000 isdn timer T310 60000 isdn overlap-receiving T302 2000 isdn incoming-voice voice isdn send-alerting isdn bchan-number-order ascending isdn sending-complete isdn outgoing display-ie no cdp enable ! router rip network 10.0.0.0 ! no ip forward-protocol nd ! no ip http server no ip http secure-server ! ! dialer-list 1 protocol ip permit ! no cdp run ! ! control-plane ! ! voice-port 0/1/0:15 ! ! ! ! dial-peer voice 1 voip destination-pattern 3... session target ipv4:10.0.0.53 session transport udp voice-class codec 1 fax-relay ecm disable fax protocol pass-through g711alaw ! dial-peer voice 5 pots destination-pattern 9.+ direct-inward-dial port 0/1/0:15 prefix 9 ! dial-peer voice 6 voip destination-pattern 2... session target ipv4:10.0.0.53 session transport udp voice-class codec 1 ! dial-peer voice 7 pots destination-pattern 4... direct-inward-dial port 0/1/0:15 prefix 4 ! dial-peer voice 8 pots destination-pattern 5... direct-inward-dial port 0/1/0:15 prefix 5 ! dial-peer voice 9 pots destination-pattern 7... direct-inward-dial port 0/1/0:15 prefix 7 ! dial-peer voice 2 voip preference 1 destination-pattern 3... session target ipv4:10.11.0.51 session transport udp voice-class codec 1 fax-relay ecm disable fax protocol pass-through g711alaw ! ! sip-ua retry invite 2 timers trying 150 ! ! ! gatekeeper shutdown ! ! line con 0 logging synchronous login line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 logging synchronous login local transport input telnet ssh ! scheduler allocate 20000 1000 end VOIP Router version 15.0 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname 2901_B_DC ! boot-start-marker boot-end-marker ! card type e1 0 1 logging buffered 51200 warnings ! no aaa new-model network-clock-participate wic 1 ! no ipv6 cef ip source-route ip cef ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-qsig isdn gateway-max-interworking ! ! voice-card 0 ! ! voice call send-alert voice call convert-discpi-to-prog voice call carrier capacity active voice rtp send-recv ! voice service voip qsig decode fax protocol pass-through g711alaw h323 h225 display-ie ccm-compatible ! voice class codec 1 codec preference 1 g711alaw ! ! ! ! license udi pid CISCO2901/K9 sn FCZ160990PL hw-module pvdm 0/0 ! ! ! ! redundancy ! ! controller E1 0/1/0 pri-group timeslots 1-31 ! controller E1 0/1/1 ! ! ! ! ! interface GigabitEthernet0/0 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$ ip address 10.0.0.53 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip address 10.11.0.54 255.255.255.0 duplex auto speed auto ! interface Serial0/1/0:15 no ip address encapsulation hdlc no logging event link-status isdn switch-type primary-qsig isdn timer T203 30000 isdn timer T310 60000 isdn overlap-receiving T302 2000 isdn protocol-emulate network isdn incoming-voice voice isdn send-alerting isdn sending-complete isdn outgoing display-ie no cdp enable ! no ip forward-protocol nd ! no ip http server no ip http secure-server ! ! dialer-list 1 protocol ip permit ! no cdp run ! ! control-plane ! ! voice-port 0/1/0:15 ! ! ! ! dial-peer voice 3 pots destination-pattern 3... direct-inward-dial port 0/1/0:15 prefix 3 ! dial-peer voice 9 voip destination-pattern 9.+ session protocol sipv2 session target ipv4:10.0.0.52 session transport udp voice-class codec 1 ! dial-peer voice 4 voip destination-pattern 4... session protocol sipv2 session target ipv4:10.0.0.52 --More-- Oct 19 09:54:28.680: %SYS-5-CONFIG_I: Configured from console by itadmin on vty0 (1 session transport udp voice-class codec 1 ! dial-peer voice 7 voip destination-pattern 7... session protocol sipv2 session target ipv4:10.0.0.52 session transport udp voice-class codec 1 ! dial-peer voice 5 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.0.0.52 session transport udp voice-class codec 1 ! dial-peer voice 2 pots destination-pattern 2... direct-inward-dial port 0/1/0:15 prefix 2 ! dial-peer voice 8 voip preference 1 destination-pattern 4... session protocol sipv2 session target ipv4:10.11.0.50 session transport udp voice-class codec 1 ! dial-peer voice 10 voip preference 1 destination-pattern 9.+ session protocol sipv2 session target ipv4:10.11.0.50 session transport udp voice-class codec 1 ! dial-peer voice 11 voip preference 1 destination-pattern 7... session protocol sipv2 session target ipv4:10.11.0.50 session transport udp voice-class codec 1 ! dial-peer voice 12 voip preference 1 destination-pattern 5... session protocol sipv2 session target ipv4:10.11.0.50 session transport udp voice-class codec 1 ! ! sip-ua retry invite 2 timers trying 150 ! ! ! gatekeeper shutdown ! ! line con 0 login local line aux 0 line vty 0 4 exec-timeout 0 0 privilege level 15 login local transport input telnet ssh ! scheduler allocate 20000 1000 end
... View more
Labels:
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
08-30-2012
12:54 AM
08-30-2012
12:54 AM
Does anyone have any suggestions?
... View more
08-25-2012
03:41 AM
I have 2 2901 routers connecting an Alcatel to an Asterisk PBX over IP. With the Asterisk PBX connected directly into the Alcatel, calls are perfect but when the routers are in the loop there is a noticable delay in speech I have attached the below call brief log - Are the delays here too high? - what does lost mean? The routers are connected via single mode fibre running at 1Gbps 11F9 : 65 57825670ms.1 +-1 pid:5 Answer 07xxxxxxxxx connected dur 00:00:00 tx:131/20324 rx:274/45076 Tele 0/1/0:15 (65) [0/1/0.22] tx:11660/2530/0ms g711alaw noise:-73 acom:3 i/0:-51/-79 dBm 11F9 : 66 57825680ms.1 +-1 pid:1 Originate 3034 connecting dur 00:00:00 tx:131/20324 rx:274/42884 IP 10.0.0.53:28776 SRTP: off rtt:2ms pl:4090/0ms lost:0/1/0 delay:65/65/75ms g711alaw TextRelay: off media inactive detected:n media contrl rcvd:n/a timestamp:n/a long duration call detected:n long duration call duration:n/a timestamp:n/a
... View more
Labels:
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
08-23-2012
12:37 AM
08-23-2012
12:37 AM
Hello, If I had your dialpeer this will send the call out the digital interface back to the Alcatel? - Potentially creating a loop? Just to mention that my diagram looks like 2 separate systems but the Alcatel is one system with 2 E1 outputs. Another point to mention is that the Alcatel has the direct connection to BT (external link in) It seems strange to me that the traces show it being successful in matching various dial-peers. As mentioned before routing internal calls through the same channels works fine, its only external to internal. I added what you suggested with no change. These are the traces: ccapi: 2600_A_ALCATEL# 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=P 2600_A_ALCATEL#EER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:33:00: //-1/6D0B943B9C90/CCAPI/cc_api_display_ie_subfields: cc_api_call_setup_ind_common: cisco-username=10.11.0.55 ----- ccCallInfo IE subfields ----- cisco-ani=123456789 cisco-anitype=0 cisco-aniplan=0 cisco-anipi=0 cisco-anisi=1 dest=3001 cisco-desttype=0 cisco-destplan=0 cisco-rdie=FFFFFFFF cisco-rdn= cisco-rdntype=-1 cisco-rdnplan=-1 cisco-rdnpi=-1 cisco-rdnsi=-1 cisco-redirectreason=-1 11:33:00: //-1/6D0B943B9C90/CCAPI/cc_api_call_setup_ind_common: Interface=0x84498E4C, Call Info( Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown), Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Incoming Dial-peer=0, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=TRUE, Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=3 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_setup_ind_common: Set Up Event Sent; Call Info(Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown)) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_process_call_setup_ind: Event=0x847C3F00 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallSetContext: Context=0x83AC2F8C 11:33:00: //3/6D0B943B9C90/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed cid 3 with tag 0 to app "_ManagedAppProcess_Default" 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallProceeding: Progress Indication=NULL(0) 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Calling Number=, Called Number=3001, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DP 2600_A_ALCATEL#M/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=2 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=2 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallDisconnect: Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0) 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallDisconnect: Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x84498E4C, Tag=0x0, Call Id=3, Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent 2600_A_ALCATEL# voip dialpeer all debugging is on 2600_A_ALCATEL# 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Calling Number=, Called Number=3001, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: 2600_A_ALCATEL#Result=Success(0); Outgoing Dial-peer=2 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=2 2600_A_ALCATEL# 2600_A_ALCATEL# 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=P 2600_A_ALCATEL#EER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Result=-1 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeertype:exit@5398 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:33:00: //-1/6D0B943B9C90/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:33:00: //-1/6D0B943B9C90/CCAPI/cc_api_display_ie_subfields: cc_api_call_setup_ind_common: cisco-username=10.11.0.55 ----- ccCallInfo IE subfields ----- cisco-ani=123456789 cisco-anitype=0 cisco-aniplan=0 cisco-anipi=0 cisco-anisi=1 dest=3001 cisco-desttype=0 cisco-destplan=0 cisco-rdie=FFFFFFFF cisco-rdn= cisco-rdntype=-1 cisco-rdnplan=-1 cisco-rdnpi=-1 cisco-rdnsi=-1 cisco-redirectreason=-1 11:33:00: //-1/6D0B943B9C90/CCAPI/cc_api_call_setup_ind_common: Interface=0x84498E4C, Call Info( Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown), Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Incoming Dial-peer=0, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=TRUE, Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=3 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_setup_ind_common: Set Up Event Sent; Call Info(Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown)) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_process_call_setup_ind: Event=0x847C3F00 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallSetContext: Context=0x83AC2F8C 11:33:00: //3/6D0B943B9C90/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed cid 3 with tag 0 to app "_ManagedAppProcess_Default" 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallProceeding: Progress Indication=NULL(0) 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Calling Number=, Called Number=3001, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=3001 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH 11:33:00: //-1/6D0B943B9C90/DP 2600_A_ALCATEL#M/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=2 Is Matched 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST 11:33:00: //-1/6D0B943B9C90/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=2 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallDisconnect: Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0) 11:33:00: //3/6D0B943B9C90/CCAPI/ccCallDisconnect: Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x84498E4C, Tag=0x0, Call Id=3, Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0) 11:33:00: //3/6D0B943B9C90/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent 2600_A_ALCATEL# dialpeer voip dialpeer all debugging is on 2600_A_ALCATEL# 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: Result=Success(0); Incoming Dial-peer=1111 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Result=-1 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeertype:exit@5398 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 11:36:37: //-1/EE29C7B79C91/DPM/dpAssociateIncomingPeerSPI:exit@5932 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Calling Number=, Called Number=3001, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=3001 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH 11:36:37: //-1/EE29C7B79C91/DPM/MatchNextPeer: 2600_A_ALCATEL#Result=Success(0); Outgoing Dial-peer=2 Is Matched 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST 11:36:37: //-1/EE29C7B79C91/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=2 2600_A_ALCATEL#
... View more
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
08-22-2012
01:08 PM
08-22-2012
01:08 PM
Just wondering if anyone has any thoughts on my problem? - It's really starting to bug me now!!!
... View more
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
08-20-2012
03:04 AM
08-20-2012
03:04 AM
Hello, I posted this a few days ago but have investigated it a bit further and came to a different conclusion. I have the following configuration: Alcatel ---> 2901 (3xxx) <-----------------Fibre IP LINK---------------> 2901 (in Data Centre) ------->Primary IP PBX ↑ Backup IP LINK ↑ Alcatel ---> 2600 (2xxx) <-----------------Fibre IP LINK---------------> 2600 (in Data Centre) ------->Secondary IP PBX Above shows the links in their basic form (it's a lot more complicated in reality). As it stands at the moment - All calls originating from a 3xxx number come from the primary PBX and via the 2901 routers. Any calls to a 3xxx number use the same link. The 2xxx link is purely there as a backup/failover. There are no day to day problems in terms of routing internal to external, digital/analog (from Alcatel) to IP and vice versa. The problem only arises when I create a fault condition. If I shutdown the IP port on the 2901 at the Alcatel end this simulates a fibre fault, remote end fault etc Calls from an IP phone to an Alcatel extension (analog/digital) route fine down the 2600 route Calls from an IP phone to an external number route down the 2600 route fine Calls from an Analog and/or digital extension route up the 2600 route fine Calls from external to a 3xxx number don't - They fail with a no route to destination message. The 2901 router is set to try the primary route first, if that fails it goes down another IP link to the 2600, it should then pass that up the chain. Which is succeedes in doing for everything except external coming in. Running my own traces I see the call go as far as the first 2600 where it then fails and I don't understand why - I would have thought it would have treated it the same as a call going from an analog/digital extension to an IP phone. The only difference being a longer CLID. It must know that it's external or the Alcatel is handling it differently to internal calls but I'm completely stumped! I also set the forward on an external number to a 2xxx number and this routed fine which proves to me that the router config is OK I would appreciate some input from someone please!! The call never seems to reach the 2600 in the Data Centre so here's a ccapi and a dialpeer trace from the 2600 at the Alcatel along with it's config: I have replaced my CLID with 123456789 for security reasons ccapi: 2600_A_ALCATEL# 00:04:17: //-1/34F0EC0A9C84/CCAPI/cc_api_display_ie_subfields: cc_api_call_setup_ind_common: cisco-username=10.11.0.55 ----- ccCallInfo IE subfields ----- cisco-ani=123456789 cisco-anitype=0 cisco-aniplan=0 cisco-anipi=0 cisco-anisi=1 dest=3001 cisco-desttype=0 cisco-destplan=0 cisco-rdie=FFFFFFFF cisco-rdn= cisco-rdntype=-1 cisco-rdnplan=-1 cisco-rdnpi=-1 cisco-rdnsi=-1 cisco-redirectreason=-1 00:04:17: //-1/34F0EC0A9C84/CCAPI/cc_api_call_setup_ind_common: Interface=0x84498E4C, Call Info( Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown), Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Incoming Dial-peer=0, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=TRUE, Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=1 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_api_call_setup_ind_common: Set Up Event Sent; Call Info(Calling Number=123456789(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed), Called Number=3001(TON=Unknown, NPI=Unknown)) 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_process_call_setup_ind: Event=0x847C3F00 00:04:17: //1/34F0EC0A9C84/CCAPI/ccCallSetContext: Context=0x83AC16CC 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed cid 1 with tag 0 to app "_ManagedAppProcess_Default" 00:04:17: //1/34F0EC0A9C84/CCAPI/ccCallProceeding: Progress Indication=NULL(0) 00:04:17: //1/34F0EC0A9C84/CCAPI/ccCa 2600_A_ALCATEL#llDisconnect: Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0) 00:04:17: //1/34F0EC0A9C84/CCAPI/ccCallDisconnect: Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3) 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_api_get_transfer_info: Transfer Number Is Null 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x84498E4C, Tag=0x0, Call Id=1, Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0) 00:04:17: //1/34F0EC0A9C84/CCAPI/cc_api_call_disconnect_done: Call Disconnect Event Sent 00:04:17: //-1/xxxxxxxxxxxx/CCAPI/ccTimerInit: ccTimerctx - 0x83A442D8 2600_A_ALCATEL# dialpeer voip dialpeer all debugging is on 2600_A_ALCATEL# 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ORIGINATE; Calling Number=123456789 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerSPI:exit@5932 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Calling Number=123456789, Called Number=3001, Voice-Interface=0x0, Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=3001 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP_MATCH_ANSWER; Calling Number=123456789 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Match Rule=DP 2600_A_ALCATEL#_MATCH_ORIGINATE; Calling Number=123456789 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype: Is Incoming=TRUE, Number Expansion=FALSE 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=, Expanded String=, Calling Number=123456789T Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Result=-1 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeertype:exit@5398 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerCore: Result=NO_MATCH(-1) After All Match Rules Attempt 00:06:03: //-1/74FA5B839C85/DPM/dpAssociateIncomingPeerSPI:exit@5932 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeersCore: Calling Number=, Called Number=3001, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=3001 00:06:03: //-1/74FA5B839C85/DPM/dpMatchCore: Dial String=3001, Expanded String=3001, Calling Number= Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH 00:06:03: //-1/74FA5B839C85/DPM/MatchNextPeer: Result=Success(0); Outgoing Dial-peer=2 Is Matched 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST 00:06:03: //-1/74FA5B839C85/DPM/dpMatchPeersMoreArg: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=2 2600_A_ALCATEL# config Building configuration... Current configuration : 2306 bytes ! version 12.4 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname 2600_A_ALCATEL ! boot-start-marker boot-end-marker ! no aaa new-model no network-clock-participate slot 1 no network-clock-participate wic 0 voice-card 1 ! ip cef ! ! ! ! no ip domain lookup isdn switch-type primary-qsig ! ! voice call send-alert voice call convert-discpi-to-prog voice call carrier capacity active voice rtp send-recv ! voice service voip fax protocol pass-through g711alaw h323 h225 timeout setup 2 ! ! voice class codec 1 codec preference 1 g711alaw ! ! ! ! ! ! ! ! ! ! ! ! ! controller E1 1/0 pri-group timeslots 1-31 ! controller E1 1/1 ! ! ! ! interface FastEthernet0/0 ip address 10.11.0.50 255.0.0.0 duplex auto speed auto no cdp enable ! interface Serial1/0:15 no ip address encapsulation hdlc no logging event link-status isdn switch-type primary-qsig isdn timer T203 30000 isdn timer T310 60000 isdn overlap-receiving T302 2000 isdn incoming-voice voice isdn bchan-number-order ascending no cdp enable ! router rip network 10.0.0.0 ! no ip forward-protocol nd ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit no cdp run ! ! control-plane ! ! ! voice-port 1/0:15 ! ! ! ! ! dial-peer voice 5 pots destination-pattern 9.+ direct-inward-dial port 1/0:15 prefix 9 ! dial-peer voice 6 pots destination-pattern 4... direct-inward-dial port 1/0:15 prefix 4 ! dial-peer voice 7 pots destination-pattern 5... direct-inward-dial port 1/0:15 prefix 5 ! dial-peer voice 8 pots destination-pattern 7... direct-inward-dial port 1/0:15 prefix 7 ! dial-peer voice 1 voip destination-pattern 20.. voice-class codec 1 session target ipv4:10.11.0.51 session transport udp ! dial-peer voice 2 voip destination-pattern 30.. voice-class codec 1 session target ipv4:10.11.0.51 session transport udp fax-relay ecm disable fax protocol pass-through g711alaw ! sip-ua retry invite 2 timers trying 150 ! ! line con 0 exec-timeout 0 0 password 7 logging synchronous login line aux 0 line vty 0 4 password 7 logging synchronous login ! ! end Message was edited by: John Campbell
... View more
Labels:
Created by
campbell-john
in IP Telephony and Phones
in IP Telephony and Phones
07-06-2012
07:01 AM
07-06-2012
07:01 AM
Hi All, Making progress. I have my above post sorted. I had to change the sip-ua timers and now it works perfectly. I am working on the other end now which I have decided to do the same as before but the difference with this is that it uses session protocol cisco instead of sipv2. The failover works fine but when dialling a number the call sits for 17 seconds before passing onto the next preference. Can anyone advise on any isdn timers that would speed this up? (adding sipv2 will not be possible due to issues that I won't go into at the moment) dial-peer voice 2 voip preference 1 destination-pattern 30.. session target ipv4:10.11.0.50 session transport udp voice-class codec 1 fax-relay ecm disable fax protocol pass-through g711alaw dial-peer voice 1 voip destination-pattern 30.. session target ipv4:10.0.0.53 session transport udp voice-class codec 1 fax-relay ecm disable fax protocol pass-through g711alaw Thanks
... View more
11-15-2018
Hi, We've ran with this for a while now and so far it seems to have
worked. Just enter mac address-t...
03-21-2018
I will give it a go and see. I have a feeling that port-security will
lock out the port before the f...
03-21-2018
Thanks, I will try that and report back. Does this then apply before
port security so a port should ...
03-21-2018
Hi, We currently have about 60 C3560 switches and about 300 desktop
machines that have port-security...
12-23-2017
Hi, I have two servers in a data centre (one is a backup) linked to the
same 3750 switch. I have ano...
08-11-2016
Hi, We have 8 VG224 units and unfortunately after a lightning storm we
now have 15 faulty ports acro...
Created by
campbell-john
in IP Telephony and Phones
11-16-2014
11-16-2014
I have two Asterisk based VoIP servers and each has an E1 card
installed. One is a primary and the o...
10-19-2012
Hi Everyone,Alcatel ---> 2901 (3xxx) <-----------------Fibre IP
LINK---------------> 2901 (in Data C...
08-25-2012
I have 2 2901 routers connecting an Alcatel to an Asterisk PBX over
IP.With the Asterisk PBX connect...
Created by
campbell-john
in IP Telephony and Phones
08-23-2012
08-23-2012
Hello,If I had your dialpeer this will send the call out the digital
interface back to the Alcatel? ...
Created by
campbell-john
in IP Telephony and Phones
08-22-2012
08-22-2012
Just wondering if anyone has any thoughts on my problem? - It's really
starting to bug me now!!!
Created by
campbell-john
in IP Telephony and Phones
08-20-2012
08-20-2012
Hello,I posted this a few days ago but have investigated it a bit
further and came to a different co...
Created by
campbell-john
in IP Telephony and Phones
07-06-2012
07-06-2012
Hi All,Making progress. I have my above post sorted. I had to change the
sip-ua timers and now it wo...
Public Statistics
| Date Registered | 02-21-2008 01:11 PM |
| Date Last Visited | 11-22-2018 01:20 AM |
| Total Messages Posted | 23 |
