About MikeCaditz

MikeCaditz · 10-18-2012

Users in remote site can get ping response but no http service from local web server where the local web server also has NAT rule allowing access from WAN. In the below config, users in remote 10.10.10.160/27 can ping 10.10.10.30 and 10.10.10.95, but...

MikeCaditz · 12-13-2011

I have a 2911 ISR and want to install a SM-ES2-24 Enhanced EtherSwitch Service Module.Do I need to power down the router?

MikeCaditz · 11-29-2011

I have both a Easy VPN server and a site-to-site VPN on the same outside interface of a 2911 router.Currently, a Easy VPN client has no route int the router then out the site-to-site VPN to the remote site.How can I create this route?Building configu...

MikeCaditz · 11-28-2011

On my 2911 router, can I have both an Easy VPN server, and a site-to-site VPN?Also, with an Easy VPN, is it possible to specify another internet (outside) IP address in my assigned range as the address remote users use . . . rather than the specific ...

MikeCaditz · 11-26-2011

When I try to connect from remote host to SSL VPN on 2911 router, I get following errors:Cisco Systems VPN Client Version 5.0.07.0410Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 5.1.2600 Se...

MikeCaditz · 10-23-2012

FYI, the above solution worked.

MikeCaditz · 10-22-2012

Thanks so much, Herbert.As an alternative to what you suggest, what do you think of this? I got it from Cisco's support document, http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtmlI would delete thes...

MikeCaditz · 12-13-2011

Thanks, Somu.But I am confused. First, the link you provided id dead.Second, the document http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/InstNetM.htmlstates:Note The following routers do not support online i...

MikeCaditz · 11-29-2011

I have successfully implented both a site-to-site VPN, and an Easy VPN server. The outside IP for each service is the same, i.e. 65.19.62.60. This is the IP address assigned to GE0/0.But I do not like this; I would like to move one of the services, p...

MikeCaditz · 11-28-2011

Using CCP I deleted the SSL VPN. Instead I created an EasyVPN. Although my EasyVPN passed the "Test VPN", I still have inability to connect via VPN client 5.I have a site to site VPN which is working properly.I cannot see where I specify the internet...

Member Since	‎11-07-2011 02:36 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	37
Total Helpful Votes Received	5

User Statistics

User Activity

Remote site to site VPN user cannot access LAN resources

installation of Enhanced EtherSwitch Service Module

routing between two VPNs on same interface

Easy VPN and site to site on same router?

SSL VPN trouble

Remote site to site VPN user cannot access LAN resources

Remote site to site VPN user cannot access LAN resources

Re: installation of Enhanced EtherSwitch Service Module

Re: Easy VPN and site to site on same router?

Re: SSL VPN trouble