Hello Guys I am very frustrated today with the extended control list , here is the topology in the diagram below , i want that the pc2 which has a ipof 192.168.40.2 /24 cant ping the router 1 interfaces to accomplish this, i configur...
Guys i install gns3 on my windows 7 pc , i have no issue with it, except when i try to configure sdm i always fail. here is the step which i did router series =7200 (c7200-advipservicesk9-mz.124-2.T.bin) ip address 192.168.10.1 255.255.255.0 ...
Hi GuysI m facing a problem regarding with virtual connection between different ospf areasCan u guys plz help me , of how can i setup a virtual link between ospf AREA 0 And AREA 2,thats why all 5 router can communicate with each otherThanks In Advanc...
Thanks Gopinathafter configure exactly what u say , the pc2 still can ping the R1 s1/1 interface but r1 is not reply all the icmp echo packet to pc2 , it replay only the certain packets... below is the output of the vpcs 2VPCS 2 >ping 192.168.20.1192...
must be possible that there will be firewall is enable whether it is windows or firewall that comes with the antivirus plz confirm it . and ping again to your laptop again and also plz confirm your VLAN .