About andy89

andy89 · 09-22-2024

Hi,we are using the Cisco ASR1001-X as core router on our ISP network. For the management of the CPE I set up a TR-069 ACS server. For testing purposes I configured the ACS URL manually on the CPE, which works fine.However I'd like our ASR to pass th...

andy89 · 10-01-2024

According to our CPE vendor it is possible to pass the ACS URL to the CPE by transferring a string like this SRD=50000#SRU=10000#TR069URL=https://myacs.xyz123.com:7547#TR069PROVC=setup# within the PPP-PAP/CHAP authentication message (PAP=Code 2, CHAP...

andy89 · 09-29-2024

Hi @mohsenshahbazi,did you find a solution for this? I'm trying the same thing on our ASR1001-X.

andy89 · 09-25-2024

According to this document protocols that can be used with "cisco-avpair" include IP, IPX, VPDN, VOIP, SHELL, RSVP, SIP, AIRNET and OUTBOUND.The format has to look like this: cisco-avpair = "protocol:attribute=value" (or * instead of = for optional a...

andy89 · 09-25-2024

Ok, I'll have a more detailed look into that. Currently the ASR retrieves the IP pool from FreeRADIUS.According to you, could it be possible to add the "TR069URL" attribute in the radreply table (that we use to assign a static IP to a user)?That is w...

andy89 · 09-25-2024

Thanks @MHM Cisco World for the reply. With DHCP opt. 43 it works - tried that earlier in a test setup.As our CPE is using PPPoE only I'm trying to make it work for PPPoE as well. Would be great if there is a way to pass the TR069 URL to the CPE with...

Member Since	‎09-22-2024 05:55 AM
Date Last Visited	‎09-30-2024 01:23 AM
Posts	7
Total Helpful Votes Received	2

User Statistics

User Activity

Assign ACS url trough PPPoE on ASR1001-X (TR-069)

Re: Assign ACS url trough PPPoE on ASR1001-X (TR-069)

Re: set custom dhcp vendor specific tag asr 9k/1k

Re: Assign ACS url trough PPPoE on ASR1001-X (TR-069)

Re: Assign ACS url trough PPPoE on ASR1001-X (TR-069)

Re: Assign ACS url trough PPPoE on ASR1001-X (TR-069)