About Syed.Javed68

Syed.Javed68 · 03-21-2016

I was working on CCNP Route-Maps using Tag project and had the attached design to work on. I was able to add tags on the fly while doing the following: Right side R4 is OSPF 1 and left R2 is RIP routers while middle ones distributing. So I was able ...

Syed.Javed68 · 03-22-2016

Thanks Jon. I figured that out as well. Appreciate your help.

Syed.Javed68 · 03-22-2016

Thanks Jon. I removed all redistribute and route-map configs and put in what you suggested. All works well but only traceroute to 2.2.2.2 from R1 is going through OSPF area instead of going just next to its neighbor R2. Here's the stats: R1# tracerou...

Syed.Javed68 · 03-21-2016

Thanks Alex. Here's what I've tried. Please share your views on this: R1# route-map OSPF-RIP permit 10 set tag 110 exit router rip redistribute ospf 1 route-map OSPF-RIP metric 1 R3# route-map OSPF-RIP deny 10 match tag 110 route-map OSPF-RIP permit...

Member Since	‎03-21-2016 08:17 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

Tag for Route-Maps

Thanks Jon. I figured that

Thanks Jon. I removed all

Thanks Alex. Here's what I've