About stephan.hermann

stephan.hermann · 10-09-2014

Hello everybody,I would like to know what's best practice to do this:The two NICs of a Debian Linux server wants to be connected with two Switchports of a Cisco Catalyst 3750 switch(stack). My goal is to have load-balancing and failover.My /etc/netwo...

stephan.hermann · 12-17-2012

Hi everybody,I try to transfer data with more than 1GBit/s between two servers, but I just get the performance of one NIC (about 1GBit/s). Here's my setting:srvnettest1 and srvnettest2 are two ubuntu 12.04 servers with three NICs each. eth0 is for ma...

stephan.hermann · 11-03-2014

Hi Michael,thanks a lot for your answer - and sorry for my late reply!I like to show you my solution - I hope that it is a solution. ;-)My config on the switch(stack):switch#show etherchannel summary...Group Port-channel Protocol Ports------+---...

stephan.hermann · 12-17-2012

Hello Peter, hello Guiseppe,thank you so much for these information!Good to know that there's nothing terribly wrong in my setting - and bad to know that I spent much time with this "problem"! ;-)Many greetsStephan

Member Since	‎12-17-2012 01:30 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

Debian Linux Bonding and Cisco Catalyst 3750 - best practise?

network bonding between Catalyst 3560 and two ubuntu 12.04 servers

Hi Michael,thanks a lot for

network bonding between Catalyst 3560 and two ubuntu 12.04 serve