CME 9 with 9951 phones.I have seen on my system that VOIP dial peers are not created for vocie register DNs unless the SIP phone is connected and registered.Is there a method to force creation of a SIP VOIP dial peer if the phone is not connected?SCC...
I activated a trial IVR licence that I now wish to deactivate but cannot:cue861# show licenseIndex 0 Feature: VMIVR-VM-MBX Period left: Life time License Type: Permanent License State: Active, In Use License Count: 20 /20 ...
Does anybody know if it is possible to remotely enable an IP phone web interface using for example an ephone- template or similar? ( I have looked at the ephone-template settings but it does not seem possible) any ideas?ThanksSent from Cisco Technica...
Can anybody give me any pointers to resolve a problem with a 2821-2821 L2L VPN config please?Router A has L2L config only.Router B has L2L and VPN client profiles.The VPN client part works fine. The L2L gives the following error on Router B when the ...
Hello, looking for some trouble shooting pointers.I have 3 routers all running CUCME7 and all running video. I can place a video call between two CIPC phones on the same router no problem no matter which router I choose.I cannot however sucessfully p...
Nick,I also have a requirement to implement this kind of HA. I found BRKARC-2023 most useful. I look forward to the forthcoming configuration guide but as an EEM script example is provided in the breakout I might just have a bash at testing this now...
Just to add to the confusion, priority modification works fine and this references the 2feature name":cue861# license modify priority VMIVR-IVR-SESS lowFeature: VMIVR-IVR-SESSIndex: 1 License type : Evaluation Lock type : Not L...
"It's a licensing issue Jim, but not as we know it" :-)It's fair enough, they just hand out the keys and it's down to TAC when the engine breaks.Any way, seems my support contract issue is resolved so hopefully TAC will help me deactivate the licens...
