About sgtpanties

sgtpanties · 03-09-2021

Hi, I just received a new Cisco ATA191-MPP to replace my old SPA112. Things seem to be working, however in the web interface firmware settings, under Voice/Information/Product Information, the Customization status displays as "Aborted". There is not...

sgtpanties · 10-26-2012

Hi, I am a home user and ex-programmer. I'm using the Cisco SPA112 with the latest firmware 1.2.1 (004). Every two or three days the ATA crashes. Here are the symptoms: a) no dial tone b) line 1 LED is ON (as normal) c) ATA is P...

sgtpanties · 12-18-2012

I'm just a home user with a DSL line going into a Asus router and my ATA connected to the router. I'm using the QoS features of the router of course. I'm using Callcentric.

sgtpanties · 12-18-2012

Hi, I just wanted to report that my SPA112 has been up for a whole month now and working great. I'm using the 1.3.0 (016) firmware. I must also admit I never fax and my call volume is about 1 call per day.

sgtpanties · 11-19-2012

I would like to remind everyone to adjust the QoS settings in your router to give the ATA top priority. I've set my rule up specifying the ATA's MAC address and it is working well.

sgtpanties · 11-19-2012

Cisco did not give me a release date, but neither did I ask.During Callcentric's DDoS crisis, after logging in, one was immediately directed to a "crisis page". That page does not display now. On the crisis page they specified slightly different se...

sgtpanties · 11-18-2012

My support case is technically closed, but I would like to report that my SPA112 has been up and working well another 7 days without a problem with the 1.3.0 (016) beta firmware. Also, this time there was not a single loss of registration.

Member Since	‎10-26-2012 05:56 AM
Date Last Visited	‎03-16-2021 06:36 PM
Posts	16

User Statistics

User Activity

ATA191-MPP Customization: Aborted

SPA112 goes catatonic, crashes, no dialtone

Re: SPA112 goes catatonic, crashes, no dialtone

Re: SPA112 goes catatonic, crashes, no dialtone

Re: SPA112 goes catatonic, crashes, no dialtone

Re: SPA112 goes catatonic, crashes, no dialtone

SPA112 goes catatonic, crashes, no dialtone