I'm working with a customer with around 50 locations and they do not want to centrally switch any traffic, including guest. The challenge is that in WLC 7.5, the behavior of how radius-applied ACLs are used was changed. In the WLC, you can manually...
Just wanting to see if anyone else has done this yet. I ran into a couple of interesting snags performing this little ritual over the last day. First, if you're using CentOS 6.4 (maybe other versions and other distros), the iso-to-usb.sh script req...
Vinay,
How does this affect phones that are associated to a standardized WLAN (data and voice endpoints), but the QoS profile and interface is dynamically assigned via radius (ISE)? In other words, the WLAN QoS is set to Silver, but the authz profi...
Your endpoint is matching is the Basic_Authenticated_Access authz policy. If you look at how that policy is constructed, the only conditions required to be met are:
1) authentication has passed
2) the auth attempt is MAB and on the wired network
If ...
Take a look at the Authorization Profiles column. Your endpoint was given PermitAccess. If you look at the Authorization Policy column, you can see part of the path to the actual authz policy/rule this endpoint hit. Grab a screen shot of your auth...
Can you paste in the results shown in the Radius Live Log to point out the authz profile that is being applied? Again, you can find that at Operations -> Radius Livelog
Do you have profiling probes configured in ISE? You can check by going to Admini...
