The 4-wire 56k CSU/DSU implements switched 56k and DDS (leased line ) operation. The hardware feature set is identical to the 4-wire 56/64k CSU/DSU for the 2524-2525. The 4-wire 56k CSU/DSU is manufactured by Adtran. * Supports DDS (leased line) o...
CCIT protocol is define the call user data in call set up field , that shows 0 in 8 bit and 0 also in 7 bit in call user data . In the debug it was showing the CUD field shows 0x01 which is Local PTT protocol also say PAD .. The question here is ...
X25 T20 timer is use to send Restart request in X25 DTE side , the s0/1 is x25 dce in X25 DCE the similar counter you have is x25 T11 which is set in DCE for restart indication, you would not see option of t20 in DCE side.I am wondering if you tu...
According to the debug we are getting INPUT clear from device connected to serial 0/1 ,once the router get input clear it would send out clear confirm. we are getting proprietory diagnostic code which is vendor specific , you need to find out from ot...
