About rojiroji123

rojiroji123 · 06-07-2011

I am having a problem about the caller time out.#dialer idle-timeout 180 eitherSo the ISDN call will be disconnect after 180 sec.However even there is traffic on the ISDN line, it will disconnect after 180 sec.For example I PING -t command to the des...

rojiroji123 · 01-12-2011

Hi, Now I am tring to setup Cisco 1812j with ISDN Line.Here is what I connect the device.(I am in Japan)ISDN Line (NTT east) >> DSU(NTT east INS Mate V30Slim with S/T port) >> Cisco 1812j(S/T)On DSU setting I enable DSU and Disable Terminator.First o...

rojiroji123 · 01-07-2011

Hi, I am having an issue with Cisco 1812j Router.I have 2 1812j router.One router I accidentally lost the password so I reset the password as following link.http://www.cisco.com/en/US/products/hw/routers/ps221/products_password_recovery09186a00800947...

rojiroji123 · 06-15-2011

Can anyone knows how to reset the time out parameter?

rojiroji123 · 01-13-2011

Thanks Leo.It works now.The problem was CHAP username was wrong.I just change the username to same name as hostname.http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a00800b4130.shtmldebug isdn q931anddebug ppp authenticationdebu...

rojiroji123 · 01-12-2011

I think I may be find the issue.I was testing the line by calling to my cellphone.But ISDN does not allow to call as voice as data.Now I test calling to the other landline number which connect with other ISDN Router,The debug log is not same as what ...

rojiroji123 · 01-12-2011

Here is the debug log.I turn on debug dialer and debug isdn event.*Jan 13 00:05:55.378: BR0 DDR: place call*Jan 13 00:05:55.382: BR0 DDR: Dialing cause ip (s=192.168.92.2, d=10.92.0.134)*Jan 13 00:05:55.382: BR0 DDR: Attempting to dial 080*********Ja...

rojiroji123 · 01-12-2011

Other information.#sh isdn statusGlobal ISDN Switchtype = nttISDN BRI0 interface dsl 0, interface ISDN Switchtype = ntt Layer 1 Status: ACTIVE Layer 2 Status: TEI = 67, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED ...

Member Since	‎01-07-2011 06:35 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	12

User Statistics

User Activity

ISDN Router 1812j - It won't reset the caller time out parameter

Can not dial out from ISDN Line with 1812j

After reset, I could not use dialer command on 1812j

ISDN Router 1812j - It won't reset the caller time out parameter

Re: Can not dial out from ISDN Line with 1812j

Re: Can not dial out from ISDN Line with 1812j

Re: Can not dial out from ISDN Line with 1812j

Re: Can not dial out from ISDN Line with 1812j