About Ruslan Kopenkin

Ruslan Kopenkin · 10-18-2020

Hello.Have problem with connecting VLANs. Devices connected via Fa3 (router) and Gi8(switch), Gi7(switch) client device.Router config:interface FastEthernet3 description << LAN L2 >> switchport mode trunk no ip address ! interface Vlan1 description <...

Ruslan Kopenkin · 09-11-2018

Hello, Got a task to NAT some traffic through remote c881. IPsec between devices works fine. sh run Building configuration... Current configuration : 5824 bytes ! ! Last configuration change at 17:22:39 UTC Thu Sep 6 2018 by admin ! version...

Ruslan Kopenkin · 10-20-2020

up

Ruslan Kopenkin · 10-18-2020

tunnels for vpnall switch ports are in L2 mode. Vlan1 is mgt int. Vlan2 should be the voice vlan.Phone should obtain address from router's dhcp server.Gi7 - access-port

Ruslan Kopenkin · 10-18-2020

I can make them as many as I wantinterface vlan 1 ip address 192.168.8.2 255.255.255.0 no ip address dhcp ! interface vlan 2 name IPT ip address 10.10.3.2 255.255.255.0 ! interface vlan 100 name wifiguest ip address 172.10.10.2 255.255.255.0Yes...

Ruslan Kopenkin · 10-18-2020

how clearer it could be? it is just router, switch and client. tunnels do not touch the switch

Ruslan Kopenkin · 10-18-2020

Member Since	‎07-16-2016 12:10 AM
Date Last Visited	‎10-26-2020 12:23 PM
Posts	13
Total Helpful Votes Received	10

User Statistics

User Activity

VLAN c881 router + sg250-08 switch

c881 PBR NAT

Re: VLAN c881 router + sg250-08 switch

Re: VLAN c881 router + sg250-08 switch

Re: VLAN c881 router + sg250-08 switch

Re: VLAN c881 router + sg250-08 switch

Re: VLAN c881 router + sg250-08 switch