Hi,we have cisco C3560X-48P Switches in our branches and use Avaya IP-Phones for our call agents. All switchports are protected by 802.1x and our Avaya IP-Phones use EAP-MD5 with username and password to authenticat the phone in the voice subnet.this...
Hi,the radius Command "automate-tester" (keepalive) does not work with our C9300-24P (IOS 09.16.04 same problen on 16.09.05).I have two identically configured switches, but the "automate-tester" (keepalive) works only on one switch (Switch No.3). I r...
Hi,I have two wlc 5508 version 7.5.102.0. one foreign and one anchor.the APs are connectet to the foreign wlc.foreign wlc has a tunnel to anchor wlc. On Anchor, I creat the SSIDs and there are breakout to internet.I use an apple iPad and HP MFP 276 A...
Hi,I have some problems with cisco wlan systems and hp airprint.I use two cisco wlc 5508, one master and one anchor. the APs ar connectet to master wlc, DHCP and the breakout point to internet are on anchor wlc.so far, with my android phone, i can co...
open a TAC and you will get two .js files to fix this issue.
I tested it today and IOS Distuibution works now without Device reboot.
I'm on PRIME V 3.10.2 with 3.10.3 MR Patch
Hi, has anyone news about the "fix" or is it possible to get a previous version of 3.10.4 ? we have more than 1000 switches to upgrade so there is no chance to do this manually.
btw...we upgrade c9300 with 17.06.05.. it doesn't matter which IOS you w...
Update: TAC told my I have to order a 0$ SKU "ISE-PLR=" to activate PLR in our SMART Account and after that i should be able to activate ISE with PLR... I haven't tried this.In the meantime I could connect our ISE over a Transport Gateway to activate...
Same problem with ISE 3.0 Patch 5 with PLROnly Cisco could help you ? Did you receive a valid Authorization Code form Cisco TAC or is it a sniplet from generated Authorization Code? thank you
hi, if you can see in my last post on the printscreen, we already send the domain in in "cisco-av-pair"for my the only one solution is, if I add the "tunnel-pvt-group-id" with the voice-vlan name.
