About Patrick Laidlaw

Patrick Laidlaw · 10-01-2014

I'm looking to setup a cli push from Prime for individual ports. I want to look to see what vlan and voice vlan is on that interface and take those numbers as variables and then push config to that interface based on what those variables say.

Patrick Laidlaw · 08-08-2014

I have a cluster that I want to manage the individual ASA's for different things how do I connect to an individual ASA other than using the serial port? IE can i have a management ip on each ASA and then the cluster management IP as well.

Patrick Laidlaw · 03-19-2014

I'm looking to see how the F3 cards are broken up into port groups or if they are line rate per port. I'm not finding any documentation to dictate either way. On the other cards when assigning them to a VDC you have to assign them based on port gro...

Patrick Laidlaw · 12-14-2012

Hello, I have a problem with caller id comming in and showing the contact id on my phones instead of the phone number. Is there a way to remove the caller contact info or replace it with the calling number using a sip profile on my router?Patrick

Patrick Laidlaw · 04-03-2011

Hi,I have two HWIC-4T1/E1 in two 2821's I can not for the life of me find software so I can configure them in the routers. I see them in the inventory but don't see them in show ver. I'm assuming that the software is not recognizing them. I've tr...

Patrick Laidlaw · 09-18-2019

http://trex-tgn.cisco.com/trex/release/latest doesn't actually work did this project get moved to somewhere else? This was updated to https

Patrick Laidlaw · 07-11-2019

These are all the old icons no marketing icons from recent slides.

Patrick Laidlaw · 07-25-2018

The better way to do this is to execute the configure-network script. sudo su /etc/sysconfig/configure-network

Patrick Laidlaw · 04-03-2011

Well Hell just figured it out its sitting right there in the config telling me to post the card type. typed into the configuration "Card type t1 0 0" and it works yeah.LOL

Patrick Laidlaw · 05-29-2009

You should be able to pop open the Lid look at the existing memory go to kingstons website and compare that memory usings kingstons tools/memory guide to get the appropriate memory that way.

Member Since	‎10-16-2000 01:25 PM
Date Last Visited	‎04-12-2024 12:48 AM
Posts	500
Total Helpful Votes Received	274

User Statistics

User Activity

How do I progam a prime cli push to pull information off the interface for setting that I need before makeing changes

In an ASA cluster how do i manage the individual firewalls.

Does the F3 card N7K-F312FQ-25 have multiple ports in a Port-Group like the F2E or M cards do?

CUBE SIP Profiles need to see if I can change the caller ID

2821 HWIC-4T1/E1 configuration/software support

Re: TRex Stateless GUI v3.1

Re: MS Visio Icons ?

Re: IP Address Change - Virtual FMC

Re: 2821 HWIC-4T1/E1 configuration/software support

Re: ASA 5510 memory upgrade kit for 8.2