About Frank Nilsen

Frank Nilsen · 10-04-2017

Anyone have a solution to this? %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet1/14 (not half duplex), with AP8252 GigabitEthernet0 (half duplex). Running Mobility Express 8.5.103.0.The duplex mismatch is coming up on all 3 WAP'...

Frank Nilsen · 10-30-2015

Hi. I'm having som troubble setting up two WAP371 in a Single Point Setup Cluster. I have enabled SPS on the 1st WAP and then I run the setup wizzard on the second one and choose "join existing cluster" and type in clustername. It then says everytin...

Frank Nilsen · 12-02-2014

Hi.Not sure if this is the right community, but I'll try.The issue is internet Connectivity on the management Interface (physical port) on a ASA 5512-X - Se Attachment for topology.I have set it up with different vlan interfaces (se attachment) and i...

Frank Nilsen · 12-01-2014

Hi.Can anyone help me configure (a normally very easy thing..) on a Cisco SG200-08 switch?Please see the attached file (sg200-1.jpg) for detailed info. ... sorry in advance for my bad handwriting :) My problem is:I want to administer the switch via t...

Frank Nilsen · 12-23-2012

Hi.Let me start off by saying I'm kind off new in the Cisco world, so please be kind I have set up a scenario for a small business and have some questions about how to manage the access between the VLANs.I would also appriciate hint and tips if my sc...

Frank Nilsen · 10-30-2015

Hi. Thanks for the quick response. One of them is baught in Norway, and the other from eBay. So that is probably the reason its not working. I guess Ill have to switch out the "A" with an "E" :) Thanks.

Frank Nilsen · 03-23-2015

I opened a case with the Support Center and after a few days with testing I received the beta FW (v. 2.9.4.18) and it has been OK sice. (there has been a couple hangups, but a reboot of the AP resolved it)

Frank Nilsen · 12-03-2014

Maybe the easyest way is to not use the management port and just create the management interface as a subinterface in the ASA, as the others, and manage it via the trunkport...I'll do some research and see what i find.Thanks for your help. /f

Frank Nilsen · 12-03-2014

Hi.Thanks again for your help, but still a no go... Gi0/44 has always been a switchport, and i have interface vlan30 with ip 10.0.30.3. I have now set ip route 0.0.0.0 0.0.0.0 10.0.10.1 on the switch, but vlan30 still can't access the internet.SW01(c...

Frank Nilsen · 12-03-2014

Shortly told, I want all devices on the management network (vlan30) to have internet connectivity. (switches, management pc's, asa, wap's, +++.) So they can reach time servers, update servers, the asa to reach botnet database and so on.But maybe I am...

Member Since	‎12-23-2012 10:54 AM
Date Last Visited	‎10-04-2017 03:49 AM
Posts	17

User Statistics

User Activity

CSCva91731 - Switch sees CDP duplex mismatch with 1800 series AP

WAP 371 Single Point Setup

Cisco ASA 5512 - Internet access on management interface

VLAN (Management) config on SG200 series

Access between VLANs

Hi.

I opened a case with the

Maybe the easyest way is to

Hi.Thanks again for your help

Shortly told, I want all