About ZF1

ZF1 · 01-14-2025

Hello, I have a Cisco IE-3400H-24T, with a number of ports connected to a 120.95.11.x network and other ports connected to a 192.168.1.x network. I have assigned these ports in the VLAN configuration as VLAN20 for 120.95.11.x and VLAN10 for 192.168.1...

ZF1 · 01-16-2025

I finally received a reply from the VFD manufacturer. They found that there is a bug in their firmware. While I wait for the new firmware (hopefully there is a fix without new hardware), I have temporarily moved the VFDs to the 120 network and everyt...

ZF1 · 01-14-2025

The image attached is a very simplified version of the system, but it gets the point across. The left network has a PLC that is able to communicate with other devices in the 120.95.11.x network AND it can also communicate with multiple remote I/O dev...

ZF1 · 01-14-2025

I do not have a button for enabling IPv4 routing. When I setup each port I set it to access the appropriate VLAN which was configured in SVI.I think it is the 3rd party device itself. Everything else is communicating between the 2 networks but this o...

Member Since	‎01-14-2025 07:51 AM
Date Last Visited	‎01-22-2025 12:32 AM
Posts	4

User Statistics

User Activity

Cisco IE-3400H-24T Layer 3 VLAN Configuration

Re: Cisco IE-3400H-24T Layer 3 VLAN Configuration

Re: Cisco IE-3400H-24T Layer 3 VLAN Configuration

Re: Cisco IE-3400H-24T Layer 3 VLAN Configuration