Hi Percy,
Can you describe what specific issue with flash storage are you having?
Multiple customers run 9148s with EMC, NetApp, or Pure flash arrays with no issues.
-Ernest
Hi,
Your zones will not be able to merge since restriction is setting. With merge-control restriction set the zones for your vsan will have to be exactly identical. Since this is not the case for your switches, merge will not complete.
To allow swit...
Hello,
To clarify you don not need to put each fcoe connection in its own vsan. Typically, the host and storage that you want to be able to communicate need be put in the same vsan. Devices in different vsans will not be able to communicate; this can...
Hi KJ,
Zone merge will automatically occur between switches if zone and vsan settings are the same on both switches. Existing switch will share zoning data with new switch across ISL link for each vsan that is trunked. By default, when you configure ...
Hi djhahl,
All MDS hardware and software versions are compatible with each other.
You should take a look at the recommended releases doc for mds:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Release...
