Hi all,the installation guide talks about registry settings to configure tftp, ccmcip and so on. What can be done if there is no "Client Service Framework" folder for me in the path they mention on CCO:HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\C...
Hi all,my customer wants to implement security through obscurity and therefore uses Port 579 for SMTP instead of 25. I tried the syntax A.B.C.D:Port on the Email Server page which was accepted and saved but did not work. :-(Does MPE support sending E...
Hi all,I have an existing preinstalled CRS 5.0 that I configured to work with another Callmanager Cluster. So it is not a new installed CRS. The scripts work fine but when I want to assign ressources to ICD on the end user page there is no field "IPC...
Hi all,I´m using CME 3.1 and want to use "Call-Blocking override": I configured the pattern, the blocking schedule and blocking timeouts under telephony-service and a PIN on the ephone. But it does not work. When I manually switch the clock on the Ro...
Hi all,is there a way to make Unity detect Forwarding Loops by itself? Example:I have two call handlers, each pointing - after greeting- to the other. This would result in a direct loop. Can dbwalker (or another tool) find out and give a warning?Than...
Hi guys,I have run into the same issue as a customer activated LDAP integration without caring for the "appadmin" user... I now try to work around this. I downloaded the CetTool.exe and installed it, i managed to create a root account on the UCCX ser...
Hi,I ran into the same problem. The debug said something about moh= live feed.So I set the moh in telephony service to a file in flash ...and it worked.Kind REgards,Markus
Hi all,I had exactly the same problem on an H.323 PRI gateway to an Alcatel PBX and it was solved by the "no isdn outgoing ie progress-indicator" command on the serial interface of the E1 as was recommended in the post.Thanks a lot, guys!Cheers,Marku...
Thank you for your quick response. I tried it already direct from console. And I had to reboot my server first. He did not realize correctly, wether a CD/DVD was inserted or not.Now we're fine again. Cheers, markus
