Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
what is the fast swtiching cef kpps of a 3271? For example a 2801 is 110.000 approx. Why are there no performance stats published anywhere ? And what of the 3230?
I have seen messages on forum regarding booting the boot image from flash disk.I did get the 123-14.T7 boot image to load ONCE. I believe i actually had errors in my syntax when it worked:Here is the show run:boot system flash disk0:rsp-ik9sv-mz.123-...
Hey all, this switch is not covered under our service contract, so thought I'd try here first before dealing with contract services and TAC.I have a 4840 at the edge of our network leading to Qwest ( which will soon be replaced with a 7505.) During ...
From what I understand Linksys switches work with ubiquiti 24v product, which has 802.3af adapter - but so far the adapters do as you said - do not boot even though cisco gives power - perhaps as you say peak power.
I discovered that the older flash drives work.By inserting a slot0 device the problem seems to be resolved. I wonder why no error message is generated when the config file "errors out".This config is working: boot-start-markerboot system flash disk0:...
Yes it does - 12.3(14)Tinterface FastEthernet0/15 no switchport ip address 192.168.201.205 255.255.255.0 ip flow ingress ip flow egress ip nbar protocol-discovery diffserv cops random-detect dscp-basedendRouter#show run interface fastEthernet 0/7Buil...
