About RegionDist19

RegionDist19 · 07-19-2011

I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1). I have converted the config so that it is ready for the ASA. I noticed the "boot system flash:" and "asdm image flash:" command references the old P...

RegionDist19 · 03-07-2011

I'm having trouble TFTPing a configuration from my 851 Router to my computer through a IPsec VPN tunnel that this router is connected though. I am able to telnet and ping all devices on the far-end with no problem. I can TFTP a config from a switch...

RegionDist19 · 02-24-2011

I would like to update the IOS on my router 851, if it needs it but I'm having trouble determining the latest version. The unit is running 12.3(8r)YI4. The latest appears to be 12.3.8-YI2. This is confusing because it appears to be a step back. O...

RegionDist19 · 01-11-2011

I have a satellite site using a Cisco Router 800 series, with a dynamicly assigned address, behind a private network. The main site, has a PIX 515e with a statically assigned external address. My site-to-site VPN connection is up and running but I ...

RegionDist19 · 12-01-2010

I need to set up a site-to-site VPN connection between a Cisco 851 router and PIX 515E. The PIX has a static address that is reachable, but the 851 router will reside on a private network. The network's DHCP server will assign the IP address to the...

RegionDist19 · 07-19-2011

Updated my config file to reflect the files in ASA. Worked just fine. Thanks.

RegionDist19 · 03-08-2011

I was able to fix the problem with connecting from CCP. When I originally added the subnet to the access-list 1, it placed it below the deny statement. I re-entered the access rule and made sure it came before the deny statement. I can connect fin...

RegionDist19 · 03-08-2011

Jennifer,Executing ip tftp source-interface Vlan1 did the trick, thank you very much. To access the router I am using the address assigned to the Vlan, which is the same one I can terminal in on. Here is the section of the config you requested:ip h...

RegionDist19 · 02-25-2011

I figured it out. I had 12.4(15)T5 originally installed and I upgraded to 12.4(15)T14 without issue. Thanks.

RegionDist19 · 01-19-2011

Thanks. The problem ended up being with a missing ACL. I needed to allow ICMP into my internal interface and that solved the issue.

Member Since	‎02-17-2010 10:13 AM
Date Last Visited	‎01-11-2024 06:57 AM
Posts	16

User Statistics

User Activity

Migrating PIX515E to ASA5520, update BIN files in config for ASA?

TFTP from router though VPN

Upgrade IOS on Router 851

Site-to-Site IPSec Routing help

Site-to-Site between Cisco 851 and PIX 515E

Migrating PIX515E to ASA5520, update BIN files in config for ASA

Re: TFTP from router though VPN

Re: TFTP from router though VPN

Re: Upgrade IOS on Router 851

Re: Site-to-Site IPSec Routing help