I'm bashing my head here trying to figure out something which I believe is really not as difficult as I'm making it out to be.I have 3 VLANs (router on a stick setup) and 2 WAN interfaces on a single router.VLAN1 -> ISP1VLAN2, VLAN3 -> ISP2 ...
VPN is working now however when testing failover it did not work. I shutdown gigabitethernet0/0 interface (ISP2) and the VLAN23 did not route out the ISP1 interface Multilink2.Any hints on what to look for. I have 2 static routes on the router conf...
Hello,No need to apologize! VPN clients get an IP in the 172.18.1.1-25 range. I should be able to ping/access from VPN client's system to VLAN2 or VLAN3. My understanding is that ACL in the client configuration indicates which networks to split tu...
What is the VL1_ACL and VL23_ACL defined here? Is this the same as VL1_TRAFFIC and VL23_TRAFFIC?I experienced issues with trying to VPN to the network today. It would not allow me to access the VL23_TRAFFIC subnets and I did include a permit for th...