About eblancha

eblancha · 09-24-2018

I've created a Cisco Packet Tracer assignment using the Activity Wizard. The students create 3 static routes on a router and the Assessment marks them correct. If the assignment is saved and opened, the 3 static routes are marked incorrectly and a lo...

eblancha · 09-24-2018

Forgot to mention that previous versions of Packet Tracer worked fine and assessed the routes correctly. And this bug is reproducible.

eblancha · 09-25-2015

Old thread but I thought that I would respond to it. There's two formats that the IP address can be passed to the host. Hex format or ASCII format. I've run into IP phones (Aastra specifically) that are expecting the IP addresses to be passed to them...

eblancha · 12-29-2012

Not quite true. IThe Information URL is supported but the format must be a text file ending with .txt. Ends up to be only a very simple file - not much use. Here's a simple text file that I've used to demonstrate:http://www.telecomworld.ca/CME-InfoU...

eblancha · 06-13-2011

Successful - very simple:Gi0/0 - external ISP1Gi0/1 - external ISP2VLAN 10 - Internal IP gateway. Worked fine. No router on a stick to do. Auto routed between all three. Did have to set the normal default routes and static routes to get to the ISPs. ...

eblancha · 05-11-2011

That's too simple - are you sure this is a Cisco product? LOL! I'll test out the box this week and report back what I find.Thanks for your help.

Member Since	‎05-10-2011 08:30 AM
Date Last Visited	‎05-12-2021 12:02 AM
Posts	17
Total Helpful Votes Received	10

User Statistics

User Activity

Cisco Packet Tracer 7.2 Activity Wizard not recognizing static routes

Re: Cisco Packet Tracer 7.2 Activity Wizard not recognizing static routes

Old thread but I thought that

CME v8 - Help (?) Button on Phone support

Re: Configure internal trunk from HWIC-4ESW to Cisco 1941

Re: Configure internal trunk from HWIC-4ESW to Cisco 1941