About Michael Hines

Michael Hines · 01-10-2015

Here's the scenario, and I apologize if my terminology is wrong. Incoming Call from PSTN via ISDN/PRI -> Translation from 4466 to ephone-hunt sequential at 1001 -> ext 1 -> ext2 -> ext3 -> ext4-> AA at 8010 -> viop dial-peer to SBC -> SBC to O365 UM ...

Michael Hines · 01-03-2013

I understand that the 69XX series phones do not support dual-line (primarily for call waiting). I am wondering if someone could provide a sample config of a workaround using two buttons/lines. I will post what I have currently. The issue I see is tha...

Michael Hines · 10-06-2015

I am having this exact same issue. I have 5 other 7916s on the network all working fine.If i take one of the sidecars of my two from the phone that is not working and put it with another phone that has a working car, it works no problem. I have tried...

Michael Hines · 02-05-2015

This is solved. The issue with the Telco. They were sending me out of band DTMF, when changed to in band, the issue was resolved.

Michael Hines · 01-28-2015

I cant believe no one has any ideas. Did I post this in the wrong group?This weekend I setup another config almost identical to this one with no issue. Same commands, same SBC, only 2 differences were a 2911 instead of 2921 and it's a different Telco...

Michael Hines · 01-15-2015

I have now noted it is not just the AA, it is any call to the SBC/VM that does not get DTMF relay. It is only when transferred through a phone. I set the front desk (4466) ext 2001 to receive night bell and set call-forward night to AA pilot and it w...

Michael Hines · 10-10-2014

I can confirm that upgrading to 7.6.130.0 resolved the issue. Thanks!

Member Since	‎01-03-2013 07:54 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

DTMF to SIP Trunk / AA after rolling through Hunt Group or Phone, Dir. Translation Works Fine

Dual-Line Config for 69XX on CME 8.6

I am having this exact same

This is solved. The issue

I cant believe no one has any

I have now noted it is not

I can confirm that upgrading