I see.
Are you using a mobility express solution?
Could you tell me the model of WLC you are using?
You can see this with "show inventory"
I have not test this on ME if that is the case.
Once you provide this I can test and let you know.
What I do is:
go to monitor tab
Select clients
Click on change filter
only selec "WLAN SSID" checkbox and select the ssid I want to see.
Click apply.
and it only shows me the clients on that ssid.
Is this what you want?
Hi
What are you trying to see in the filter option? 2504 works for me with no issues.
I would recommend for you to upgrade to the latest on 8.2 which is 8.2.166.0.
Please do try to upgrade also your browser or use internet explorer.
Also as...
Hi
What are you trying to see, the filter option in 2504 works for me with no issues.
I would recommend for you to upgrade to the latest on 8.2 which is 8.2.166.0.
Please do try to upgrade also your browser or use internet explorer.
Also as a...
Hi
It has been maybe 5 years since your question but still, this is not supported yet.
even on CMX 10.2 it is not supported.
Maybe in the future...
- Rodrigo Osorio Porras