About jaschulz

jaschulz · 05-04-2009

Hello. The router has 3 fxo ports but only able to make 1 call outbound at a time. The caller will not getting anything, just disconnects. I have verified all the ports and pots lines by shutting each one down and able to complete calls out of all th...

jaschulz · 01-03-2013

Great advice on this thread. If you're looking for a sample configuration here is one if you plan to use connection trunk.http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800afd65.shtml

jaschulz · 01-03-2013

Not a great answer for this. There really is no way to edit them in bulk. The only way I've been able to do it and it has a capacity to mess up a lot of users. Is to export and edit the file and re-import.But to be clear it's only a workaround I've r...

jaschulz · 12-04-2012

Just wanted to add this if another person has this issue as I ran into as well.the thing is, you would assume perhaps that to join the hunt group you can just press HLOG since thats what you also press to logout when your logged in right? Wrong, if...

jaschulz · 05-03-2012

Hello,I agree with Rob. If you are setting up networking here is the checklist you will need to go through.http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/networking/guide/8xcucnet020.html

jaschulz · 04-24-2012

Yes similar to that.Look at the DN on the phone. There is a setting for 'Max Number of Calls' try increasing that if it is 2 to 4.

Member Since	‎05-04-2009 03:21 PM
Date Last Visited	‎08-21-2017 01:28 PM
Posts	74
Total Helpful Votes Received	55

User Statistics

User Activity

CME-3 fxo ports but can only make 1 O/B call

PBX-to-PBX call over IP Network

Bulk Update of Softkey Template

CME/SRST 8.5 Agent Status Control using HLog

Cisco unity connection subscriber issue

Cannot transfer calls