Hi i am not able to find how to check PO load balancing for storage VDC, although i know by default for FCoE traffic on storage vdc it is OXID but whether it is src-dst l4port or src-dst ipl4port.

Hi, i am in process of building a new datacenter with 2 nexus7k in core/aggregation and 2 n5k in access layer. I am running fabric path on F2 cards between 7k and 5k, also enabled vpc+ on 7k and 5 both. There are few vrfs on 7k which are communicatin...

I want to create following setup, wanted to know that how is this achievable3 VRF on nexus 7k and all VRFs connected to each other in following manner through virtual firewall contextsN7K-VRF1----FW-CONTEXT1----N7K-VRF2---FW-CONTEXT2-----N7KVRF3     ...

Hione of my port on N7K-1 is connected to another port on N7K-2, there are many other ports also connected between these chassis, but i am not able to see this particlar port, i have enabled cdp o this port also particularly by issues command cdp ena...

Hi If i have nexus 7000 in core and nexus 5000 in aggregation, can i configure fabric path between 7k & 5k, although i know that it is a feature of 7k which requires F card, but does that mean that i need to have 7k also in aggregation.Thanks in adva...